This content is for Finland. Our system has detected that you are from United States. Do you want to set United States as your new country?

This product is not available in Finland. Please use the product search or contact us.

VINNAPAS® 4020 N

VINNAPAS® 4020 N is a copolymer powder of vinyl acetate and ethylene and is dispersible in water. VINNAPAS® 4020 N is a semi flexible polymer with no effect on rheology and has excellent general-purpose properties.


Properties

  • Compounds modified with VINNAPAS® 4020 N exhibit improved adhesion, flexural strength, deformability, abrasion resistance, and have better handling properties. Leveling, thixotropy and water retention are essentially unaffected. The product is therefore ideal for combination with mortar additives intended to confer specific properties.
  • VINNAPAS® 4020 N contains a fine mineral filler as an antiblocking agent.
  • It is produced without the use of organic solvents, plasticizers and film-forming agents.


For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4020 N with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

For typical application fields of VINNAPAS® 4020 N, refer to the "Application" section.  Please discuss additional applications with your WACKER customer representative.

Packaging

25 kg paper bags
Big Bags or bulk on request.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker-Kemi AB
Greta Garbos väg 13, 5 th floor
16940 Solna
Sweden
+46  8  5220-5220 (Phone)
Contact
Website

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

更多产品

个产品 技术数据
Minimum film forming temperature 最低成膜温度
VINNAPAS® 4023 N (GER) 1 °C[1] 33.8 °F[1] - -
VINNAPAS® 4042 H 0 °C[1] 32.0 °F[1] - -
VINNAPAS® 4121 N - - 1 °C[2] 33.8 °F[2]
VINNAPAS® 4141 H - - 0 °C[2] 32.0 °F[2]
VINNAPAS® 4449 E (Scale-up Product) - - 0 °C[2] 32.0 °F[2]
VINNAPAS® 5043 N - - 0 °C[2] 32.0 °F[2]
VINNAPAS® 5044 N (GER) - - 0 °C[2] 32.0 °F[2]
VINNAPAS® 5044 N (ULS) - - 0 °C[2] 32.0 °F[2]
VINNAPAS® 5048 H - - 0 °C[2] 32.0 °F[2]
VINNAPAS® 5545 E - - 0 °C[2] 32.0 °F[2]
VINNAPAS® 8031 H - - 0 °C[2] 32.0 °F[2]
VINNAPAS® 8034 H - - 0 °C[2] 32.0 °F[2]
说明
[1] Minimum film forming temperature | DIN ISO 2115,  [2] 最低成膜温度 | DIN ISO 2115 

Order

My media


Go to order form

Sales Contact

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
+44  1344  401 670 （电话）

My favorites

My products