VINNAPAS® 5814 H (Scale-up product)
VINNAPAS® 5814 H (Scale-up product) is a strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for skim coat (wall putty), waterproofing, renders (wall plasters), grouts. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® H. It reduces water absorption and improve mechanical properties and can be used in many applications where reduced water absorption is desired. VINNAPAS® 5814 H (Scale-up product) is in the process of introduction into industrial use (Scale-up Product). Therefore the product data given are subject to change. Always consult WACKER about the product’s availability before using it for industrial purposes.
Properties
Data sheets
For typical application fields of VINNAPAS® 5814 H (Scale-up product), refer to the section "application". Please discuss additional applications with your WACKER customer representative.
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5814 H (Scale-up product) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
Packaging
25 kg paper bags
Big Bags or bulk on request.
Storage
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.
Sales and support
Bracknell RG12 1WA
United Kingdom
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Distributors
WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.
SM1 4AF Sutton, Surrey
44 208 7707295 (Fax)