VINNAPAS® eco 8118 E (XX MB)
![$VINNAPAS<sup>®</sup> eco 8118 E (XX MB)](/h/en-gb/medias/REDcert2.jpg?context=bWFzdGVyfGltYWdlc3w0OTAxfGltYWdlL2pwZWd8YURkbEwyZzVOQzg1TnprME1qZ3hOakF6TVRBeUwxSkZSR05sY25ReUxtcHdad3w5YmY3OTJmNGRjMTljMDRmZjllYWIyNmZhYmRjZDg0ZmE0MzYwMWQ0ZGYwZDA5YTQ5MWJkMmYyYmFkMTc3ODZm)
VINNAPAS® eco 8118 E (XX MB) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives. It is based on a flexible terpolymer of vinylacetate, ethylene and vinychloride and belongs to the product class VINNAPAS® E which means that it has a neutral effect on rheology and provides extended open time and very high adhesion after water immersion and heat storage, giving a high degree of formulation freedom.
VINNAPAS® eco is a fossil resources saving product, where a specific share of the fossil-based raw materials required for manufacturing of this product can be replaced by certified sustainable renewable feedstock. The substitution is based on the REDcert² mass balance approach, audited by an independent third party.
The exact amount of fossil raw material replaced depends on the selected product version and is specified in the corresponding certificate. Please contact your WACKER representative or visit the product page on the WACKER website www.wacker.com for additional information regarding WACKER’s products or sustainability efforts, including mass balance.
Properties
- VINNAPAS® eco 8118 E (XX MB) is a dispersible terpolymer powder composed of vinyl acetate, vinyl chloride and ethylene.
- Dry-mix mortars modified with VINNAPAS® eco 8118 E (XX MB) exhibit improved adhesion, flexural strength, deformability and abrasion resistance.
- VINNAPAS® eco 8118 E (XX MB) is particularly suited for modifying cementitious and gypsum-based dry-mix mortars, especially tile adhesives.
- VINNAPAS® eco 8118 E (XX MB) contains a fine mineral filler as an antiblocking agent. It is produced without the use of organic solvents, plasticizers and film-forming agents.
- VINNAPAS® eco 8118 E (XX MB) is suitable for formulating high-quality, low-emissions flexible tile adhesives. It provides long open time and very good tensile adhesion strength, especially after immersion in water and heat aging.
Data sheets
For typical application fields of VINNAPAS® eco 8118 E (XX MB), refer to the section "application". Please discuss additional applications with your WACKER customer representative.
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® eco 8118 E (XX MB) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.
Slight color variations of the polymer granulate may occure without impairing the product's functionality.
Packaging
Big Bags or bulk on request.
Storage
Sales and support
Bracknell RG12 1WA
United Kingdom
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.