This content is for India. Our system has detected that you are from United States. Do you want to set United States as your new country?
ELASTOSIL® M 4115 A/B

Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: Moldmaking
Eigenschaften
- low viscosity
- easy to meter due to 1 : 1 ratio
- low hardness (17 Shore A)
- good mechanical properties
- very fast and non-shrink cure at room temperature
- easy demolding
Spezifische Merkmale von ELASTOSIL® M 4115 A/B
- Addition Curing
- Fast curing at room temperature
- Flowable
- Low viscosity
- No chemical shrinkage
- Two-component
As a low-Shore addition-curing RTV-2 silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® M 4115 A/B is extremly suitable for casting all common reproduction materials, particularly if absolutely accurate copies of models with pronounced undercuts are required.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”.
Important note:
The platinum catalyst is in component A.
Caution:
A and B components may only be used together if they have the same batch number.
Lagerung
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
SM1 4AF Sutton, Surrey
United Kingdom
44 208 7707295 (Fax)
Webseite
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.