This content is for Israel. Our system has detected that you are from United States. Do you want to set United States as your new country?
ELASTOSIL® RT 563
ELASTOSIL® RT 563 is a pourable, room-temperature-vulcanizing, condensation-curing, two-component silicone rubber.
Main application: encapsulation of electronic components
More products
Products | Technical data | |||||
---|---|---|---|---|---|---|
Viscosity, dynamic | Tear strength | Hardness Shore A | Hardness Shore 00 | Tensile strength | Elongation at break | |
ELASTOSIL® RT 426 | - - | > 4 N/mm[1] > 4 N/mm[1] | 60[2] 60[2] | - - | 4.5 N/mm²[5] 4.5 N/mm²[5] | 120 %[8] 120 %[8] |
ELASTOSIL® RT 563 | - - | 3 N/mm[1] 3 N/mm[1] | 55[2] 55[2] | - - | 4.5 N/mm²[5] 4.5 N/mm²[5] | 120 %[8] 120 %[8] |
ELASTOSIL® RT 602 A/B | 5000 mPa·s[11] 5000 mPa·s[11] | - - | 30[3] 30[3] | - - | 1.5 N/mm²[6] 1.5 N/mm²[6] | 130 %[9] 130 %[9] |
ELASTOSIL® RT 607 A/B | 15000 mPa·s[12] 15000 mPa·s[12] | - - | 55[3] 55[3] | - - | 3 N/mm²[6] 3 N/mm²[6] | 100 %[9] 100 %[9] |
ELASTOSIL® RT 622 A/B | 18000.0 mPa·s[13] 18000.0 mPa·s[13] | 30 N/mm[1] 30 N/mm[1] | 27[4] 27[4] | - - | 6.5 N/mm²[7] 6.5 N/mm²[7] | 550 %[10] 550 %[10] |
ELASTOSIL® SOLAR 2205 | - - | - - | - - | 50[15] 50[15] | - - | - - |
SEMICOSIL® 949 UV A | 150.0 mPa·s[14] 150.0 mPa·s[14] | - - | - - | 40[16] 40[16] | - - | - - |
SEMICOSIL® 949 UV B | 150.0 mPa·s[14] 150.0 mPa·s[14] | - - | - - | 40[16] 40[16] | - - | - - |
[1] Tear strength | ASTM D 624 B, [2] Hardness Shore A | ISO 868, [3] Hardness Shore A | DIN ISO 48-4, [4] Hardness Shore A | DIN 53505 / ISO 868, [5] Tensile strength | ISO 37, [6] Tensile strength | ISO 37 type 1, [7] Tensile strength | DIN 53504 S1 / ISO 37, [8] Elongation at break | ISO 37, [9] Elongation at break | ISO 37 type 1, [10] Elongation at break | DIN 53504 S1 / ISO 37, [11] Viscosity, dynamic | 23 °C | ISO 3219, [12] Viscosity, dynamic | 23 °C | DIN EN ISO 3219, [13] Viscosity, dynamic | 23 °C | DIN EN ISO 3219 | Spindle 4; 2,5 UpM; 23 °C, [14] Viscosity, dynamic | 25.0 °C | DIN EN ISO 3219, [15] Hardness Shore 00 | ASTM D 2240, [16] Shore 00 | 23 °C | ASTM D 2240 | 10 sec 140 mW/cm² followed by 30 min 150°C