ELASTOSIL® RT 622 A/B
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Properties
- excellent mechanical properties
- low hardness
- meets the requirements of EN 45545-2:2020 for Hazard Level HL1 (requirement set R22), and for Hazard Level HL1 and HL2 (requirement set R23 and R24), respectively.
Specific features of ELASTOSIL® RT 622 A/B
- Addition Curing
- Flowable
- Two-component
Important note: The platinum catalyst is in component B.
Important: A and B components may only be used together if they have the same batch number.
We recommend running preliminary tests to optimize conditions for the particular application.
Comprehensive instructions are given in our leaflet "ELASTOSIL® - PROCESSING RTV-2 SILICONE RUBBERS".
- all-round potting compound
- technical mouldings
- encapsulation of electronic components
- slot exit potting for electrical coils
Storage
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
Wacker Chemicals Ltd.
Contact
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
United Kingdom
+44
1344
401 670
(Phone)Bracknell RG12 1WA
United Kingdom
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.