This content is for Israel. Our system has detected that you are from United States. Do you want to set United States as your new country?
LUMISIL® 3350 UV 1K
LUMISIL® 3350 UV 1K is a 1-part transparent silicone elastomer that is cured by UV condition for displays.
Properties
Specific features of LUMISIL® 3350 UV 1K
- Addition Curing
- Flowable
- Highly transparent
- No chemical shrinkage
- Two-component
- UV curing
Data sheets
All surfaces must be clean and free of contaminants that will inhibit the cure of the product.
Examples of inhibiting contaminants are sulfur-containing materials, plasticizers, urethanes, amine-containing materials, and organometallic compounds – especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small-scale test should be run to determine compatibility.
Curing speed can be adjusted by UV power and time.
Also heating after UV exposure can accelerate curing process.
We recommend running preliminary tests to optimize conditions for particular application.
- Recommand Lamp type: UV-A (ex. Mercury, Metal Halide etc.), 365 nm LED (If the applies lamp is 365nm LED lamp, the higher UV irradiance would be better)
Storage
LUMISIL® 3350 UV 1K should be stored between 5 °C and 30 °C and below 60%RH in the tightly closed original container.
The 'Best use before end' date (Shelf life) of each batch appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case, however, the properties required for the intended use must be checked for quality assurance reasons.
Shelf life
• LUMISIL® 3350 UV 1K : 6month
Sales and support
34750 Ataşehir / Istanbul
Türkiye
+90 216 569-8210 (Fax)
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Distributors
WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.