This content is for Israel. Our system has detected that you are from United States. Do you want to set United States as your new country?

SEMICOSIL® 827 UV A

SEMICOSIL® 827 UV is specially designed for an assembly glue or side-sealing which requires high adhesion.

This is a 2-component elastomer as SEMICOSIL® 827 UV A and ELASTOSIL® CAT UV with 10:1 mixing ratio and a non-slump silicone adhesive that is cured by UV conditions with unique cure behavior for automotives.

This is designed for oven-free processing or wet bonding during processing with fast adhesion built-up at oven processing.


Properties

  • Extremely high adhesion to various substrates such as metals, glass
  • Primerless adhesion to many substrates
  • Fast curing and adhesion built-up at the minimum energy input
  • Thixotropic for non-slump with nozzle dispensability
  • Waterproof property with low surface energy and hydrophobic structure

Specific features of SEMICOSIL® 827 UV A

  • Addition Curing
  • Non-slump
  • Two-component
  • UV curing
  • Assembly glue for displays
  • Side-sealing agent for smart-window applications
  • Bonding material or sealing agent in electronics, automotive, and other industrial applications

Processing

Surface preparation

All surfaces must be clean and free of contaminants that will inhibit the cure of SEMICOSIL® 827 UV A and ELASTOSIL® Cat UV.

Examples of inhibiting contaminants are sulfur-containing materials, plasticizers, urethanes, amine-containing materials, and organometallic compounds – especially organotin compounds. If a substrate’s ability to inhibit cure is unknown, a small-scale test should be run to determine compatibility.

 

Mixing ratio

Part A (SEMICOSIL® 827 UV A) : Part B (Elastosil® Cat UV) =  10 : 1

 

Curing

Curing speed can be adjusted by UV power and time. Also, heat can accelerate the curing process.

We recommend running preliminary tests to optimize conditions for the particular application. Comprehensive processing instructions are given in below; 

  • Recommended Lamp Type: UV-A, Mercury, 365 nm LED
  • For the Normal process, Metal Halid is recommended 
  • For the Hybrid process (UV first, then laminate); UV energy should be controlled depending on the open time from UV activation to Lamination

If the applied lamp is a 365nm LED lamp, the higher UV irradiance would be better (ex. 2,000 mW/cm2).

Tack-free time can be increased or decreased depending on the applied irradiance of the energy source.

Packaging

1KG BOTTLE PE

18KG HOBBOCK PE

Storage

SEMICOSIL® 827 UV A and ELASTOSIL® CAT UV as part B should be stored under 25°C/50%RH in the tightly closed original container.

 

* Shelf life

The 'Best use before end' date (Shelf life) of each batch appears on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case, however, the properties required for the intended use must be checked for quality assurance reasons.

 

SEMICOSIL® 827 UV A: 12 month

ELASTOSIL® CAT UV: 6 month

Sales and support

Wacker Kimya Ticaret Limited Şirketi
Tevfik Fikret Cad. No: 32/4
34750 Ataşehir / Istanbul
Türkiye
+90  216  569-7050 (Phone)
+90 216 569-8210  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.

Order

My media


Go to order form

Sales Contact

Wacker Kimya Ticaret Limited Şirketi
Tevfik Fikret Cad. No: 32/4
34750 Ataşehir / Istanbul
+90  216  569-7050 (Phone)

My favorites

My products