VINNAPAS® 5005 N

VINNAPAS® 5005 N  is a dispersible polymer powder for dry mix mortars, specifically suited for cost-efficient cementitious tile adhesives, wall and joint fillers. It is based on a very hard VA/E copolymer and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology. VINNAPAS® 5005 N provides good adhesion strength very efficiently in tile adhesive at low polymer dosages.


特性

  • VINNAPAS® 5005 N is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • Mortars modified with VINNAPAS® 5005 N exhibit improved adhesion, flexural strength, deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected.
  • The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
  • VINNAPAS® 5005 N is a hard standard dispersible polymer powder with essentially no effect on rheological properties.
  • VINNAPAS® 5005 N contains a fine mineral filler as antiblocking agent. It is produced without addition of organic solvents, plasticizers or filmforming agents.

For typical application fields of VINNAPAS® 5005 N, refer to the section "application". We recommend VINNAPAS® 5005 N in tile adhesives in a dosage of up to 2%. Please contact your WACKER customer representative to discuss possible formulations or additional applications. 

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5005 N with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed. 

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

包装

25 kg paper bags

储存

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

销售和支持

Wacker-Chemie, s.r.o.
Podnikatelska 1186/45
301 00 Plzen - Skvrnany
捷克共和国
+420  378  010-103 （电话）
+420 378 010-113  （传真）
Contact Sales
网站

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

购物车

我的媒体


转至订单表

联系方式

Wacker Kimya Ticaret Limited Şirketi
Tevfik Fikret Cad. No: 32/4
34750 Ataşehir / Istanbul
+90  216  569-7050 (Phone)

收藏夹

我的产品