This content is for Czech Republic. Our system has detected that you are from United States. Do you want to set United States as your new country?

VINNAPAS® 7034 E

VINNAPAS® 7034 E  is a dispersible polymer powder for dry mix mortars, specifically suited for renders and plasters and concrete repair. It is based on a flexible terpolymer of vinyl acetate, ethylene and vinyl ester. VINNAPAS® 7034 E belongs to the product class VINNAPAS® E which means that it provides enhanced properties like improved workability, adhesion or water resistance, to name just a few.


Eigenschaften

  • VINNAPAS® 7034 E is a terpolymer powder of vinyl acetate, vinyl ester and ethylene and is dispersible in water.
  • Compounds modified with VINNAPAS® 7034 E exhibit improved adhesion, flexural strength in bending, deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected.
  • The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
  • VINNAPAS® 7034 E contains a fine mineral filler as an antiblocking agent and is produced without the addition of organic solvents, plasticizers and film-forming agents.

For typical application fields of VINNAPAS® 7034 E you can refer to the section "application". VINNAPAS® 7034 E can be also used for soil stabilization. Please discuss additional applications with your WACKER customer representative.

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 7034 E with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


 

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

Verpackung / Gebinde

25 kg paper bags
Big Bags or bulk on request.

Lagerung

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Vertrieb & Support

Wacker-Chemie, s.r.o.
Podnikatelska 1186/45
301 00 Plzen - Skvrnany
Tschechische Republik
+420  378  010-103 (Phone)
+420 378 010-113  (Fax)
Kontakt
Webseite

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Would you like a product sample?

You can request a product sample here.

Request sample

Mehr Produkte

Produkte Technische Daten
Minimum film forming temperature
VINNAPAS® 4042 H 0 °C[1] 32.0 °F[1]
VINNAPAS® 4419 E (Scale-up Product) 4 °C[1] 39.2 °F[1]
VINNAPAS® 4449 E (Scale-up Product) 0 °C[1] 32.0 °F[1]
VINNAPAS® 5010 N (GER) 4 °C[1] 39.2 °F[1]
VINNAPAS® 5044 N (GER) 0 °C[1] 32.0 °F[1]
VINNAPAS® 5044 N (ULS) 0 °C[1] 32.0 °F[1]
VINNAPAS® 5048 H 0 °C[1] 32.0 °F[1]
VINNAPAS® 5518 H 4 °C[1] 39.2 °F[1]
VINNAPAS® 5710 N (GER) (Scale-up Product) 4 °C[1] 39.2 °F[1]
VINNAPAS® 7031 H 0 °C[1] 32.0 °F[1]
VINNAPAS® 7034 E 0 °C[1] 32.0 °F[1]
VINNAPAS® 8031 H 0 °C[1] 32.0 °F[1]
VINNAPAS® 8034 H 0 °C[1] 32.0 °F[1]
Legend
[1] Minimum film forming temperature | DIN ISO 2115 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Kimya Ticaret Limited Şirketi
Tevfik Fikret Cad. No: 32/4
34750 Ataşehir / Istanbul
+90  216  569-7050 (Phone)

Meine Favoriten

Meine Produkte