This content is for China (Mainland). Our system has detected that you are from United States. Do you want to set United States as your new country?

ELASTOSIL® M 4630 A/B

$ELASTOSIL<sup>®</sup> M 4630 A/B

Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.

 

Main application: Making molds for concrete casting.

 

Food contact (FDA/BfR compliant).

 

Verfügbare Farben
  • White

Eigenschaften

  •  very good flow
  •  fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
  •  low Shore A hardness (approx. 28)
  •  high tear strength
  •  excellent long-term stability of the mechanical properties of the vulcanizate
  •  outstanding resistance to concrete

Spezifische Merkmale von ELASTOSIL® M 4630 A/B

  • Additionsvernetzend
  • ausgezeichnete mechanische Eigenschaften
  • Beständigkeit gegenüber Beton
  • Beständigkeit gegenüber Gießharzen
  • BfR konform
  • FDA konform
  • Fließfähig
  • kein chemischer Schrumpf
  • Lebensmittelkontakt
  • niedrige Viskosität
  • zweikomponentig

Due to its outstanding resistance to concrete and superior mechanical properties, ELASTOSIL® M 4630 A/B is ideal for use in molds for making concrete reproductions of models with deep undercuts.


As a low-shore, addition-curing RTV-2 silicone rubber, which cures without dimensional shrinkage, ELASTOSIL® M 4630 A/B is also extremely suitable for casting all other common reproduction materials, especially casting resins where absolutely accurate copies of models with pronounced undercuts are required.

Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”.

 

Important note:
The platinum catalyst is in component B.


Caution:
A and B components may only be used together if they have the same batch number.

Lagerung

The 'Best use before end' date of each batch is shown on the product label.

 

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
United States
+1  888  922-5374 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Viscosity, dynamic Tear strength Hardness Shore A Tensile strength Elongation at break
CENUSIL® M 830 A/B 8000 mPa·s[1] 8000 mPa·s[1] > 20 N/mm[3] > 20 N/mm[3] 26[4] 26[4] 5 N/mm²[6] 5 N/mm²[6] 500 %[8] 500 %[8]
ELASTOSIL® M 4630 A/B 15000 mPa·s[2] 15000 mPa·s[2] > 30 N/mm[3] > 30 N/mm[3] 28[5] 28[5] 6.5 N/mm²[7] 6.5 N/mm²[7] 700 %[9] 700 %[9]
ELASTOSIL® M 4635 A/B 20000 mPa·s[2] 20000 mPa·s[2] > 30 N/mm[3] > 30 N/mm[3] 37[5] 37[5] 7 N/mm²[7] 7 N/mm²[7] 480 %[9] 480 %[9]
Legend
[1] Viscosity, dynamic | 23 °C | ISO 3219,  [2] Viscosity, dynamic after stirring | 23 °C | ISO 3219,  [3] Tear strength | ASTM D 624 B,  [4] Hardness Shore A | DIN ISO 48-4,  [5] Hardness Shore A | ISO 868,  [6] Tensile strength | ISO 37 type 1,  [7] Tensile strength | ISO 37,  [8] Elongation at break | ISO 37 type 1,  [9] Elongation at break | ISO 37 

Similiar products

ELASTOSIL® M 4635 A/BRoom Temperature Curing Silicone Rubber (RTV-2)

Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.

 

Main application: Making molds for concrete casting.

 

Foo...

Show product

CENUSIL® M 830 A/BRoom Temperature Curing Silicone Rubber (RTV-2)

 is a pourable, addition-curing RTV-2 silicone rubber that cures at room temperature.
Main application: Making molds for concrete casting.
Food contact (FDA/ BfR compliant).

Show product

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Kimya Ticaret Limited Şirketi
Tevfik Fikret Cad. No: 32/4
34750 Ataşehir / Istanbul
+90  216  569-7050 (Phone)

Meine Favoriten

Meine Produkte