This content is for India. Our system has detected that you are from United States. Do you want to set United States as your new country?

SEMICOSIL® 986/1K

SEMICOSIL® 986/1K is a non-slump, thermally curable, addition curing one-part silicone rubber.


Properties

  •  ready-to-use, one-part system
  •  thixotropic
  •  translucent
  •  medium hardness
  •  high flexibility (low-stress-adhesive)
  •  primerless adhesion to many substrates
  •  rapid heat cure
  •  ultraviolett fluorescing
  •  general purpose adhesive for the electronics industry
  •  FIPG applications

Surface preparation
All surfaces must be clean and free of contaminants that will inhibit the cure of SEMICOSIL® 986/1K. Examples of inhibiting contaminants are sulfur containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds – especially organotin compounds. If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.


Dispensing
Because of the thixotropy (shear thinning effect) SEMICOSIL® 986/1K can be dispensed easily with all dispensing equipments. Since silicones dissolve notable amounts of air, an in-line degassing is recommended.

Curing
SEMICOSIL® 986/1K works best when cured at 115 °C or more depending on the size and heat sink properties of the components.


Temperature Curing time, thickness 10 mm
100°C 6 h
130°C 30 min
150 °C 10 min

Adhesion
SEMICOSIL® 986/1K shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.

Storage

The 'Best use before end' date of each batch is shown on the product label.

SEMICOSIL® 986/1K should be stored  between +5 and +25°C in its tightly closed containers.


Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Metroark Chemicals Pvt Ltd.
D.H. Road, Chandi
Kolkata 743503
India
+91  33  24072-100 (Phone)
+91 33 24072-502  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.

Order

My media


Go to order form

Sales Contact

Wacker Chemie India Pvt. Ltd.
Goregaon E,
Mumbai 400063
+91  22  42365-500 (Phone)

My favorites

My products