This content is for Germany. Our system has detected that you are from United States. Do you want to set United States as your new country?

NEXIVA® 714

Für die Anzeige zusätzlicher Inhalte und Funktionen benötigen wir Ihre Zustimmung zum Setzen von Cookies. Bitte akzeptieren Sie "Funktionale Cookies" über Ihre Cookie-Einstellungen.

NEXIVA ® CT 714 is a dispersible polymer powder based on acrylate and styrene. It is designed as a co-binder or additive for powder-based paints and primers.


Eigenschaften

NEXIVA® CT 714 provides the following advantages to paint manufacturers:

  • Biocide free binder.
  • Allows the formulation of powder-based products.
  • No organic solvents, plasticizers, film forming agents needed in formulations.
  • Easier storage, no silo needed.
  • No skinning compared to liquid polymer dispersions.
  • Better workability under challenging climatic
    conditions.

NEXIVA ® CT 714 is recommended as co-binder and additive for various applications such as interior architectural paints and primers due to its good binding power, rheological and dispersing properties and good re-dispersibility in water.

Processing

NEXIVA® CT 714 can be mixed together with the other solid raw materials of the dry formulation. For the production of ready-to-use paint, we recommend adding NEXIVA® directly to the mill base, just as is the case with the filler. After the powder is mixed with water, it should ideally be applied immediately. It may be necessary to add biocides to the water-mixed powder if the powder has not been used for a prolonged period of time before application.

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

Verpackung / Gebinde

25 kg paper bags

Lagerung

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Would you like a product sample?

You can request a product sample here.

Request sample

Distributoren

WACKER verfügt weltweit über ein Netzwerk fachkundiger Vertriebspartner. Bitte wählen Sie noch eine Anwendung aus damit wir Ihnen Ihre Ansprechpartner nennen können.

IMCD Deutschland GmbH
Konrad-Adenauer-Ufer 41-45
50668 Köln
49  221  77650 (Phone)
49 221 776520  (Fax)
Kontakt Händler Webseite

More products

Products Technical data
Minimum film forming temperature
NEXIVA® 115 4 °C[1] 39.2 °F[1]
NEXIVA® 121 0 °C[1] 32.0 °F[1]
NEXIVA® 225 4 °C[1] 39.2 °F[1]
NEXIVA® 314 0 °C[1] 32.0 °F[1]
NEXIVA® 714 - -
Legend
[1] Minimum film forming temperature | DIN ISO 2115 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemicals Malaysia Sdn. Bhd.
23A-13A Turm Q Zentral - Nr. 2A Jalan Stesen Sentral 2
50470 Kuala Lumpur Sentral
+60  3  2731-8600 (Phone)

Meine Favoriten

Meine Produkte