VINNAPAS® 4115 N (KOR)

VINNAPAS® 4115 N (KOR) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and Skim Coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 4115 N (KOR) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.


特性

  • VINNAPAS® 4115 N (KOR) is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • Compounds modified with VINNAPAS® 4115 N (KOR)  exhibit improved adhesion, flexural strength, deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected.
  • The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
  • VINNAPAS® 4115 N (KOR)  contains a fine mineral filler as an antiblocking agent.
  • It is produced without the addition of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 4115 N (KOR) is a hard general-purpose powder and has no effect on rheological properties. It is eminently suitable for formulating compounds of high ultimate strength and low emissions.

For typical application fields of VINNAPAS® 4115 N (KOR), refer to the section "application". Please discuss additional applications with your WACKER customer representative.

 

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4115 N (KOR) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties.

The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

包装

25 kg paper bags

Big Bags or bulk on request.

储存

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

销售和支持

Wacker-Chemie, s.r.o.
Podnikatelska 1186/45
301 00 Plzen - Skvrnany
Czech Republic
+420  378  010-103 （电话）
+420 378 010-113  （传真）
Contact Sales
网站

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

经销商

瓦克在全球拥有专业的销售合作伙伴网络。 请选择一项应用，以便我们为您提供联系人。

RADKA spol.s r.o. Pardubice
Na Luzci 706
63636 Lazne Bohdanec
420  466  924911 （电话）
420 466 921586  （传真）
经销商联系方式 网站

购物车

我的媒体


转至订单表

联系方式

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
+971  4  709-9999 (Phone)

收藏夹

我的产品