This content is for Bangladesh. Our system has detected that you are from United States. Do you want to set United States as your new country?

This product is not available in Bangladesh. Please use the product search or contact us.

VINNAPAS® 5535 T


VINNAPAS® 5535 T is a flexible dispersible polymer powder based on vinyl acetate and ethylene with a thixotropic effect, for good workability and for very good tensile adhesion strength.


Properties

 

  • Compounds modified with VINNAPAS® 5535 T exhibit improved adhesion, flexural strength, deformability and abrasion resistance and are easier to process.
  • VINNAPAS® 5535 T contains a fine mineral filler as an antiblocking agent. It is produced without the use of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 5535 T is a non-slump polymer powder in the medium Tg range.
  • Cementitious and gypsum-bound formulations that have been modified with VINNAPAS® 5535 T display improved non-slump characteristics and thus better processing characteristics.

Data sheets

For typical application fields of VINNAPAS® 5535 T, refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing 

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5535 T with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

Packaging

25 kg paper bags
Big Bags or bulk on request.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Chemie India Pvt. Ltd.
Goregaon E,
Mumbai 400063
India
+91  22  42365-500 (Phone)
+91 22 42365-570  (Fax)
Contact
Website

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Order

My media


Go to order form

Sales Contact

Wacker-Chemie Benelux B.V.
Heiligeweg 166
1561 DM Krommenie
+31  75  64760-00 (Phone)

My favorites

My products