This content is for South Africa. Our system has detected that you are from United States. Do you want to set United States as your new country?

VINNAPAS® 5021 T

VINNAPAS® 5021 T  is a dispersible polymer powder for dry mix mortars, specifically suited for tile adhesive and wall/ joint fillers. It is based on semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS T which means it has a thixotropic effect on the rheology. 


特性

  • VINNAPAS® 5021 T is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • Compounds modified with VINNAPAS® 5021 T exhibit improved adhesion, flexural strength, deformability and abrasion resistance and are easier to process.
  • Combinations with cement and gypsum can provide mortars which exhibit non-sag properties.
  • VINNAPAS® 5021 T contains a fine mineral filler as an antiblocking agent. It is produced without the use of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 5021 T is a non-slump dispersible polymer powder in the medium Tg range. It is suitable for formulating low emission compounds that must exhibit good non-slump properties.

For typical application fields of VINNAPAS® 5021 T, refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing 

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5021 T with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


 

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

包装

25 kg paper bags
Big Bags or bulk on request.

储存

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

销售和支持

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
阿拉伯联合酋长国
+971  4  709-9999 （电话）
+971 4 709-9911  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

购物车

我的媒体


转至订单表

联系方式

Wacker-Chemie Benelux B.V.
Heiligeweg 166
1561 DM Krommenie
+31  75  64760-00 (Phone)

收藏夹

我的产品