This content is for Netherlands. Our system has detected that you are from United States. Do you want to set United States as your new country?

VINNAPAS® 8812 T

VINNAPAS® 8812 T is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and wall trowelling compounds. It is based on a flexible copolymer of vinylacetate, ethylene and vinychloride and belongs to the product class VINNAPAS® T which means that it provides good anti sag properties and excellent adhesion after water immersion, giving a high degree of formulation freedom. VINNAPAS® 8812 T is part of our standard range, offering you the best-in-class solution for a wide variety of applications.


Properties

  • VINNAPAS® 8812 T is a dispersible polymer powder based on a new generation of terpolymer composed of vinyl acetate, vinyl chloride and ethylene. 
  • VINNAPAS® 8812 T is a polymeric binder and is ideal for modifying cementitious and gypsum-based drymix mortars, especially tile adhesives. 
  • VINNAPAS® 8812 T provides very good workability and thixotropy of the fresh mortar. 
  • Compounds modified with VINNAPAS® 8812 T exhibit improved adhesion, flexural strength, deformability and abrasion resistance. Combinations with cement and gypsum can provide mortars which exhibit non-sag properties. 
  • contains a fine mineral filler as an antiblocking agent. It is produced without the use of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 8812 T is a non-slump dispersible polymer powder in the medium Tg range. It is suitable for formulating low emission compounds that must exhibit good non-slump properties. 

For typical application fields of VINNAPAS® 8812 T, refer to the section "application". Please discuss additional applications with your WACKER customer representative. 

Processing 

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 8812 T with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed. 

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

Packaging

25 kg paper bags

Big Bags or bulk on request. 

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker-Chemie Benelux B.V.
Heiligeweg 166
1561 DM Krommenie
Netherlands
+31  75  64760-00 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Order

My media


Go to order form

Sales Contact

Wacker-Chemie Benelux B.V.
Heiligeweg 166
1561 DM Krommenie
+31  75  64760-00 (Phone)

My favorites

My products