此内容适用于德国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
SILPURAN® 2100 A/B
Two-component, addition-curing silicone composition curing to a soft silicone adhesive
Properties
-
biocompatible, certificates of compatibility with USP Class VI and ISO 10993 available on request
-
no by-products from curing process
- medium viscosity, pourable
- mixing ratio 1 : 1
- good adhesion, 2.7 N/2.5 cm (90° peel test, on stainless steel)
-
high transparency
Specific features of SILPURAN® 2100 A/B
- Addition Curing
- Biocompatible
- Suitable for skin contact
- Two-component
Data sheets
SILPURAN® 2100 A/B can be used as a skin adhesive in medical applications.
Components A and B of SILPURAN® 2100 A/B are mixed homogeneously in a ratio A : B = 1 : 1 and vulcanise rapidly at temperatures over 100 °C.
SILPURAN® 2100 A/B has good adhesive properties that can be adjusted to suit the relevant requirements:
Increasing the proportion of component A results in a softer vulcanisate and increased tackiness. Increasing the proportion of component B results in a harder vulcanisate and reduced tackiness.
Important note:
The platinum catalyst is in component A.
Caution!
Only A and B components with the same batch number may be processed together!
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.