This content is for Germany. Our system has detected that you are from United States. Do you want to set United States as your new country?
SILPURAN® 2100 A/B
Two-component, addition-curing silicone composition curing to a soft silicone adhesive
Eigenschaften
-
biocompatible, certificates of compatibility with USP Class VI and ISO 10993 available on request
-
no by-products from curing process
- medium viscosity, pourable
- mixing ratio 1 : 1
- good adhesion, 2.7 N/2.5 cm (90° peel test, on stainless steel)
-
high transparency
Spezifische Merkmale von SILPURAN® 2100 A/B
- Additionsvernetzend
- biokompatibel
- Hautverträglich
- zweikomponentig
Datenblätter
SILPURAN® 2100 A/B can be used as a skin adhesive in medical applications.
Components A and B of SILPURAN® 2100 A/B are mixed homogeneously in a ratio A : B = 1 : 1 and vulcanise rapidly at temperatures over 100 °C.
SILPURAN® 2100 A/B has good adhesive properties that can be adjusted to suit the relevant requirements:
Increasing the proportion of component A results in a softer vulcanisate and increased tackiness. Increasing the proportion of component B results in a harder vulcanisate and reduced tackiness.
Important note:
The platinum catalyst is in component A.
Caution!
Only A and B components with the same batch number may be processed together!
Lagerung
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.