This content is for Israel. Our system has detected that you are from United States. Do you want to set United States as your new country?
LUMISIL® 100 A/B
LUMISIL® 100 A/B is a 2-part silicone gel(1:1) that is cured by heat conditions for displays.
Eigenschaften
- Self-leveling with low viscosity
- Fast cure at low temperature (under 70°C)
- Good optical performance
- Remarkable high reliability
- Excellent thermal stability
- Low shrinkage
Spezifische Merkmale von LUMISIL® 100 A/B
- Additionsvernetzend
- Fließfähig
- hochtransparent
- kein chemischer Schrumpf
- schnelle Aushärtung bei moderaten Temperaturen
- Schnelle Aushärtung unter Hitze
- zweikomponentig
Datenblätter
All surfaces must be clean and free of contaminants that will inhibit the cure of the product
Examples of inhibiting contaminants are sulfer containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.
In mass production, Degassing is essentional process before mixing of materials.
Part A : Part B = 1 : 1
Curing speed can be adjusted by temperature and time. Heat can accelerate curing process.
We recommend running preliminary tests to optimize conditions for particular application.
Lagerung
The 'Best use before end' date of each batch appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case, however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
34750 Ataşehir / Istanbul
Türkei
+90 216 569-8210 (Fax)
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.