This content is for Pakistan. Our system has detected that you are from United States. Do you want to set United States as your new country?

ELASTOSIL® P 7683/25 A/B

Addition-curing RTV-2 silicone rubber curing to a silicone elastomer of very low hardness.


特性

  • low viscosity, easily pourable
  • mixing ratio 1 : 1
  • fast cure at room temperature which can be accelerated considerably by the application of heat
  • low hardness Shore 00 (~ 25)
  • translucent vulcanizate

ELASTOSIL® P 7683/25 A/B的特殊性能

  • Addition Curing
  • Fast curing at room temperature
  • Flowable
  • Suitable for skin contact
  • Two-component


ELASTOSIL® P 7683/25 A/B can be used for molding applications in prosthetics.

Components A and B of ELASTOSIL® P 7683/25 A/B are homogeneously mixed in a ratio of 1 : 1 and vulcanize rapidly at temperatures above 100 °C. In a given application the required curing conditions (temperature and time) will also depend on the size and thickness of the specimen.

 

Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”


Important note:
The platinum catalyst is in component A.

Caution!
Only A and B components with the same batch number may be processed together!

储存

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

销售和支持

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 （电话）
+971 4 709-9911  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Viscosity, dynamic Tear strength Hardness Shore A Hardness Shore 00 Tensile strength Elongation at break
ELASTOSIL® P 7683/25 A/B 1400 mPa·s 1400 mPa·s 2.0 N/mm[2] 2.0 N/mm[2] - - 25 25 1.0 N/mm²[4] 1.0 N/mm²[4] 500 %[6] 500 %[6]
ELASTOSIL® P 7684/40 A/B 2000 mPa·s[1] 2000 mPa·s[1] 6 N/mm[2] 6 N/mm[2] 4[8] 4[8] 40[3] 40[3] 2 N/mm²[5] 2 N/mm²[5] 600 %[7] 600 %[7]
ELASTOSIL® P 7684/60 A/B 2000 mPa·s[1] 2000 mPa·s[1] 13 N/mm[2] 13 N/mm[2] 12[8] 12[8] 60[3] 60[3] 3 N/mm²[5] 3 N/mm²[5] 600 %[7] 600 %[7]
Legend
[1] Viscosity, dynamic | DIN EN ISO 3219,  [2] Tear strength | ASTM D 624 B,  [3] Hardness Shore 00 | ASTM D 2240,  [4] Tensile strength | ISO 37,  [5] Tensile strength | ISO 37 type 1,  [6] Elongation at break | ISO 37,  [7] Elongation at break | ISO 37 type 1,  [8] Hardness Shore A | DIN ISO 48-4 

购物车

我的媒体


转至订单表

联系方式

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
+971  4  709-9999 (Phone)

收藏夹

我的产品