This content is for Belgium. Our system has detected that you are from United States. Do you want to set United States as your new country?
ELASTOSIL® M 4630 A/B
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: Making molds for concrete casting.
Food contact (FDA/BfR compliant).
- White
Eigenschaften
- very good flow
- fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
- low Shore A hardness (approx. 28)
- high tear strength
- excellent long-term stability of the mechanical properties of the vulcanizate
- outstanding resistance to concrete
Spezifische Merkmale von ELASTOSIL® M 4630 A/B
- Additionsvernetzend
- ausgezeichnete mechanische Eigenschaften
- Beständigkeit gegenüber Beton
- Beständigkeit gegenüber Gießharzen
- BfR konform
- FDA konform
- Fließfähig
- kein chemischer Schrumpf
- Lebensmittelkontakt
- niedrige Viskosität
- zweikomponentig
Due to its outstanding resistance to concrete and superior mechanical properties, ELASTOSIL® M 4630 A/B is ideal for use in molds for making concrete reproductions of models with deep undercuts.
As a low-shore, addition-curing RTV-2 silicone rubber, which cures without dimensional shrinkage, ELASTOSIL® M 4630 A/B is also extremely suitable for casting all other common reproduction materials, especially casting resins where absolutely accurate copies of models with pronounced undercuts are required.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”.
Important note:
The platinum catalyst is in component B.
Caution:
A and B components may only be used together if they have the same batch number.
Lagerung
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.