This content is for Brazil. Our system has detected that you are from United States. Do you want to set United States as your new country?
LUMISIL® 307 IM UV A/B
LUMISIL® 307 IM UV is a 2-part transparent optically clear resin(OCR) and DAM that is cured by UV condition for displays.
特性
-
Customized DAM grade to match with LUMISIL 203 IM UV
-
1:1 mixing ratio for processability
-
No oxygen inhibition
-
Excellent stress relaxation with high elongation and damping factor by long chain structure
-
Stable bonding for various substrates with stable cohesive failure mode
-
Excellent optical stability
-
Low shrinkage
LUMISIL® 307 IM UV A/B的特殊性能
- 加成固化
- 双组分
- 无化学收缩
- 易流动的
- 紫外固化
- 高透明度
All surfaces must be clean and free of contaminants that will inhibit the cure of the product.
Examples of inhibiting contaminants are sulfur-containing materials, plasticizers, urethanes, amine-containing materials, and organometallic compounds – especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small-scale test should be run to determine compatibility.
Curing speed can be adjusted by UV power and time.
Also heating after UV exposure can accelerate curing process.
We recommend running preliminary tests to optimize conditions for particular application.
- Recommand Lamp type: UV-A (ex. Mercury, Metal Halide etc.), 365 nm LED (If the applies lamp is 365nm LED lamp, the higher UV irradiance would be better)
包装
LUMISIL 307 IM UV (DAM) A 1KG BOTTLE PE
LUMISIL 307 IM UV (DAM) A 9KG BOTTLE PE
LUMISIL 203 IM UV B (common B) 1KG BOTTLE PE
LUMISIL 203 IM UV B (common B) 9KG BOTTLE PE
储存
The 'Best use before end' date of each batch appears on the product label.
Storage beyond the date specif ied on the label does not necessarily mean that the product is no longer usable.
In this case, however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
06612-060 Jandira
巴西
+55 11 4789-8345 （传真）
网站