This content is for Uganda. Our system has detected that you are from United States. Do you want to set United States as your new country?

ELASTOSIL® N 2010


Properties

  • neutral curing system (alkoxy)
  • translucent
  • sprayable
  • primerless adhesion to many substrates
  • solvent free
  • Recommended service temperature from -45 °C to +180 °C

Specific features of ELASTOSIL® N 2010

  • 1-component system
  • Self-levelling
  • Shear thinning

General-purpose potting and coating grade for technical applications.

ELASTOSIL® N2010 is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. Good adhesion to plastics and metals in combination with a elasticity and durability open up a wide range of potential uses.

The consistency of the uncured material allows processing by dipping, spraying, dispensing. ELASTOSIL® N2010 exhibits outstanding resistance to weathering, ageing, moisture, and UV light. The vulcanized silicone rubber permanently remains elastic over a wide temperature range from -50 °C to +180 °C (-58 to +356°F).


If removing of silicone rubber from machines or dispensing equipment is necessary, white spirit is recommended as a solvent. However, cleaning should take place before the rubber is fully cured.

Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES

 

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.

Orkila International
Rive Gauche Tower, 22nd floor Corniche el Nahr
Beirut
961  3  103524 (Phone)
Contact distributor Website
Orkila International
Rive Gauche Tower, 22nd floor Corniche el Nahr
Beirut
961  3  103524 (Phone)
Contact distributor Website
Orkila International
Rive Gauche Tower, 22nd floor Corniche el Nahr
Beirut
961  3  103524 (Phone)
Contact distributor Website

Order

My media


Sales Contact

Wacker Chemie AG
Gisela-Stein-Strasse 1
81671 Munich
+49  89  6279-0 (Phone)

My favorites

My products