SILFOAM® eco SE 1060

SILFOAM® eco SE 1060 is a versatile antifoam emulsion, which contains a comparatively high amount of emulsifier, based on renewable raw materials according to TÜV NORD Standard REDcert².

 

It features a high resistance to alkalis and acids and may further be used in a wide range of areas in which pH is critical.


Properties

SILFOAM® eco SE 1060 has proved ideal for tackling foam in surfactant rich formulations. It is mainly used in wastewater treatment but it is also a useful auxiliary in many processes of the chemical industry.

SILFOAM® eco SE 1060 is a low-viscosity emulsion, it can be metered readily, with stable dispersions easily attainable in highviscosity formulations.

In low-viscosity products, preliminary compatibility and stability tests should be performed on the system to be defoamed.

The amount to add to liquid formulations depends on the desired degree of foam control, but usually lies between 0.1 and 2 %.

If SILFOAM® eco SE 1060 is to be added during a process, the emulsion should be added undiluted, as it is already sufficiently dispersed by its emulsion form.

Especially after a longer storage time we recommend to stir the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 – 400 rpm).

But be cautious: too high shear can break the emulsion.

If feed pumps are used, they should be of the low shear force type.

Storage

Minimum temperature allowed during storage and transportation: 0 °C

Maximum temperature allowed during storage and transportation: 40 °C

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

No distributors were found for this product

更多产品

个产品 技术数据
pH pH值
PULPSIL® 613 E - - - -
PULPSIL® 672 E - - - -
PULPSIL® 683 E - - - -
PULPSIL® 684 E - - - -
PULPSIL® 733 E - - - -
PULPSIL® 763 E - - - -
PULPSIL® 823 E - - - -
PULPSIL® 824 E - - - -
PULPSIL® 844 E - - - -
PULPSIL® 850 E - - - -
SILFOAM® eco SE 1060 - - - -
SILFOAM® eco SE 2060 - - - -
SILFOAM® eco SE 3060 - - - -
SILFOAM® SE 1060 - - - -
SILFOAM® SE 1220 3.5 - 5.0[1] 3.5 - 5.0[1] - -
SILFOAM® SE 1661 - - - -
SILFOAM® SE 2 - - - -
SILFOAM® SE 2060 - - - -
SILFOAM® SE 3060 - - - -
SILFOAM® SE 3210 approx. 8[1] approx. 8[1] - -
SILFOAM® SE 36 - - - -
SILFOAM® SE 39 - - - -
SILFOAM® SE 4260 - - - -
SILFOAM® SE 47 - - - -
SILFOAM® SE 47 NB 5 - 8[2] 5 - 8[2] - -
SILFOAM® SE 55A - - approx. 8[3] approx. 8[3]
SILFOAM® SE 6 - - - -
SILFOAM® SRE - - - -
说明
[1] pH | WSTM 3392,  [2] pH value | 指示剂条,  [3] pH值 | WSTM 3390 

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

My favorites

My products