This content is for Germany. Our system has detected that you are from United States. Do you want to set United States as your new country?

ELASTOSIL® P 7684/40 A/B

Addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness.


Properties

  • low viscosity, easily pourable
  • mixing ratio 1 : 1
  • fast cure at room temperature which can be accelerated considerably by the application of heat
  • low hardness Shore 00 (~ 40)
  • translucent vulcanizate

Specific features of ELASTOSIL® P 7684/40 A/B

  • Addition Curing
  • Fast curing at room temperature
  • Flowable
  • Suitable for skin contact
  • Two-component


 

Components A and B of ELASTOSIL® P 7684/40 A/B are homogeneously mixed in a ratio of 1 : 1 and vulcanize rapidly at temperatures above 100 °C. In a given application the required curing conditions (temperature and time) will also depend on the size and thickness of the specimen.

 

Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”


Important note:
The platinum catalyst is in component A.

Caution!
Only A and B components with the same batch number may be processed together!

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
Vereinigte Arabische Emirate
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

更多产品

个产品 技术数据
Viscosity, dynamic Tear strength Shore density A Hardness Shore 00 Tensile strength Elongation at break 断裂伸长率
ELASTOSIL® P 7683/25 A/B 1400 mPa·s 1400 mPa·s 2.0 N/mm[2] 2.0 N/mm[2] - - 25 25 1.0 N/mm²[4] 1.0 N/mm²[4] 500 %[6] 500 %[6] - -
ELASTOSIL® P 7684/40 A/B 2000 mPa·s[1] 2000 mPa·s[1] 6 N/mm[2] 6 N/mm[2] 4[9] 4[9] 40[3] 40[3] 2 N/mm²[5] 2 N/mm²[5] 600 %[7] 600 %[7] - -
ELASTOSIL® P 7684/60 A/B 2000 mPa·s[1] 2000 mPa·s[1] 13 N/mm[2] 13 N/mm[2] 12[9] 12[9] 60[3] 60[3] 3 N/mm²[5] 3 N/mm²[5] - - 600 %[8] 600 %[8]
说明
[1] Viscosity, dynamic | DIN EN ISO 3219,  [2] Tear strength | ASTM D 624 B,  [3] Hardness Shore 00 | ASTM D 2240,  [4] Tensile strength | ISO 37,  [5] Tensile strength | ISO 37 type 1,  [6] Elongation at break | ISO 37,  [7] Elongation at break | ISO 37 type 1,  [8] 断裂伸长率 | ISO 37 type 1,  [9] Shore density A | DIN ISO 48-4 

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

My favorites

My products