Liosil TS 7301 E

Liosil TS 7301 E is a microemulsion of a hydrophilic functional silicone without defoamer developed especially as a softener for the tissue industry.


Properties

Liosil TS 7301 E is a microemulsion of a hydrophilic functional silicone without defoamer developed especially as a softener for the tissue industry.

The product amount should be tailored to the particular tissue being used. It is generally recommended that the tissue should be coated with between 2 and 8 wt.% of Liosil TS 7301 E. If the product is applied by spraying technology, one of the following two criteria should be observed:

1. The atmospheric particle distribution should comply with SEHSC recommendations (see "guidance for aerosol application of silicone-based materials"), i.e. the average particle size should be larger than 30 µm, and less than 1% of the particles should be smaller than 10 µm.

2. If aerosols are formed, we recommend relating to the silicone fluid not to exceed a TLV of 0.2 mg/m³ air which is recommended by ACGIH for mineral oil mist.

The use of the emulsion is recommended for all conventional tissue types such as toilet paper, facial tissue or cosmetic wipes which may benefit from a certain soft feel. The emulsion can be combined with other organic softeners, provided an adequate compatibility test has been performed.

WACKER SILFOAM® antifoam agent technology has not been added to reduce or eliminate foaming during processing. If substantial foaming should be present, then WACKER SILFOAM® antifoam agent technology may be needed.

Storage

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

No distributors were found for this product

More products

Products Technical data
pH Content Appearance
Liosil TS 7301 E 6 - 8[1] 6 - 8[1] - - - -
LIOSIL® HC 303 E US 4.5[2] 4.5[2] - - clear - slightly opaque clear - slightly opaque
POWERSOFT® PE 280 4.5 - 5[3] 4.5 - 5[3] approx. 25 %[5] approx. 25 %[5] clear to slightly yellowish clear to slightly yellowish
POWERSOFT® UP 70 LV 5.0 - 7.0[4] 5.0 - 7.0[4] approx. 60 %[6] approx. 60 %[6] extensively clear, colorless to slightly yellowish extensively clear, colorless to slightly yellowish
WACKER® EAF 300 - - - - Clear liquid Clear liquid
WACKER® FINISH CT 45 E approx. 5 approx. 5 approx. 40 %[6] approx. 40 %[6] milky, white milky, white
WACKER® FINISH CT 46 E 4.5 - 7.0[2] 4.5 - 7.0[2] 38.0 - 41.0 %[7] 38.0 - 41.0 %[7] milky white milky white
WACKER® FINISH CT 64 E approx. 5[3] approx. 5[3] approx. 61 %[6] approx. 61 %[6] colorless, opaque colorless, opaque
WETSOFT® 150E CONC - - - - Clear emulsion Clear emulsion
WETSOFT® LV 430 - - - - milky, white milky, white
WETSOFT® LV 500 - - - - sligthly hazy, colourless sligthly hazy, colourless
WETSOFT® NE 430 - - - - milky-white macro emulsion milky-white macro emulsion
Legend
[1] pH | 100 % ,  [2] pH | Indicator strips,  [3] pH value,  [4] pH value | Indicator strips,  [5] Solid content,  [6] Solid content | Microwave oven,  [7] Solid Content | Microwave oven 

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

My favorites

My products