Liosil TS 9200 E
Liosil TS 9200 E is a nonionic microemulsion of a functional silicone developed especially as a softener for the tissue industry.
Data sheets
The product amount should be tailored to the particular tissue being used. It is generally recommended that the tissue should be coated with between 2 and 8 wt.% of Liosil TS 9200 E. If the product is applied by spraying technology, one of the following two criteria should be observed:
1. The atmospheric particle distribution should comply with SEHSC recommendations (see "guidance for aerosol application of silicone-based materials"), i.e. the average particle size should be larger than 30 µm, and less than 1% of the particles should be smaller than 10 µm.
2. If aerosols are formed we recommend, relating to the silicone fluid, not to exceed a TLV of 0.2 mg/m³ air which is recommended by ACGIH for mineral oil mist.
The use of the emulsion is recommended for all conventional tissue types, such as toilet paper and facial tissue, which may benefit from a certain soft feel. The emulsion can be combined with other organic softeners too, provided an adequate compatibility test has been performed. WACKER SILFOAM® antifoam agent technology can be added to reduce or eliminate foaming during processing. It is therefore recommended that the Liosil TS 9200 E be stirred before use.
Storage
The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on
the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the
properties required for the intended use must be checked for quality assurance reasons.
Sales and support
Ann Arbor, MI 48108
United States
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Distributors
WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.