This content is for Bangladesh. Our system has detected that you are from United States. Do you want to set United States as your new country?
This product is not available in Bangladesh. Please use the product search or contact us.
VINNAPAS® 4141 H
VINNAPAS® 4141 H is a slightly hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for ETICS and mineral renders and plasters. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H which means that it provides a hydrophobic effect in addition to the basic properties adhesion and flexibility.
Properties
- VINNAPAS® 4141 H is a copolymer powder based on vinyl acetate and ethylene and is dispersible in water.
- VINNAPAS® 4141 H is a polymeric binder. Blended with inorganic binders the powder will provide very good workability; cured mortars with VINNAPAS® 4141 H have improved adhesion, flexibility, deformability and abrasion resistance.
- Due to the high ethylene content and therefore low glass transition temperature (Tg), this copolymer is highly flexible.
- VINNAPAS® 4141 H will not have any effect on water-vapor transmission at common dosages.
- VINNAPAS® 4141 H contains a fine mineral filler as an antiblocking agent.
- VINNAPAS® 4141 H is a dispersible polymer powder in the lower Tg range with a medium hydrophobic effect. It has no effect on rheology.
- Mortars modified with VINNAPAS® 4141 H exhibit very good workability and attain high strength when cured.
- Additionally VINNAPAS® 4141 H provides hydrophobicity within the hardened mortar.
- It is especially suitable for adhesive mortars and embedding mortars in ETICS.
Specific features of VINNAPAS® 4141 H
- Colorless
- Defoaming
Data sheets
For typical application fields of VINNAPAS® 4141 H, refer to the section "application". Please discuss additional applications with your WACKER customer representative.
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4141 H with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
Packaging
25 kg paper bags
Big Bags or bulk on request.
Storage
Sales and support
Mumbai 400063
India
+91 22 42365-570 (Fax)
Website
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.