This content is for Switzerland. Our system has detected that you are from United States. Do you want to set United States as your new country?

This product is not available in Switzerland. Please use the product search or contact us.

WACKER® GM - GLAZING AND METAL (German Technology)

WACKER® GM is a one-part, neutral-curing, low-modulus DIY silicone sealant with outstanding adhesion, long shelf life and excellent tooling characteristics.

WACKER® GM cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber.


Properties

•  Non-sag

•  Ready gunnability at low (+5°C) and high (+40°C) temperature

•  Flexible at low (-40°C) and high temperatures (+150°C)

•  Excellent weatherablity

•  Almost odorless

•  Excellent tooling characteristics for professional use

•  Non-corrosive to metals

•  Suitable for alkaline substrates such as concrete, mortar, fibrous cement

Applications

 

•   DIY applications (cars, boat, caravan, house)

 

Preparation

 

The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material, dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

 

Adhesion

 

WACKER® GM exhibits excellent primerless adhesion to most non-porous siliceous material, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker; impregnated, varnished or painted wood; and some plastics.

Users must carry out their own tests due to the great variety of substances.

The adhesion can be improved in many cases by pretreatment of the substrates with a primer.

If adhesion difficulties arise please contact our technical service.

 

Restrictions on use

 

WACKER® GM may be discolored in contact with some organic elastomers, e.g. EPDM, APTK and neoprene.

WACKER® GM is not recommended for use on natural stone, such as marble, granite, quartzite, as it can cause staining.

WACKER® GM must not be used for sealing of auqaria.

WACKER® GM is not recommended for structural glazing bonding.

The curing time can be extended at lower temperature, lower humidity or by low volume of air exchange.

Packaging

WACKER® GM is usually supplied in standard size cartridges that fit all standard caulking guns.

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Germany
+49  711  61942-0 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

My favorites

My products