This content is for Brazil. Our system has detected that you are from United States. Do you want to set United States as your new country?
ELASTOSIL® M 4115 A/B
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: Moldmaking
Eigenschaften
- low viscosity
- easy to meter due to 1 : 1 ratio
- low hardness (17 Shore A)
- good mechanical properties
- very fast and non-shrink cure at room temperature
- easy demolding
Spezifische Merkmale von ELASTOSIL® M 4115 A/B
- Additionsvernetzend
- Fließfähig
- kein chemischer Schrumpf
- niedrige Viskosität
- Schnelle Aushärtung bei Raumtemperatur
- zweikomponentig
As a low-Shore addition-curing RTV-2 silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® M 4115 A/B is extremly suitable for casting all common reproduction materials, particularly if absolutely accurate copies of models with pronounced undercuts are required.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”.
Important note:
The platinum catalyst is in component A.
Caution:
A and B components may only be used together if they have the same batch number.
Lagerung
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
700000 Ho Chi Minh City
Vietnam
+84 8 3825-6721 (Fax)
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Mehr Produkte
Bitte wählen Sie eine Anwendung um Ihnen passende Produkte anzeigen zu können.