此内容适用于孟加拉国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗?

WACKER SilGel® 613

WACKER SilGel® 613 is a pourable, addition-curing, RTV-2 silicone rubber that vulcanizes at room temperature to a very soft silicone gel.



Eigenschaften

  •  two-part, 10 : 1 mixing ratio
  •  very low viscosity
  •  rapid curing at room temperature with ELASTOSIL® CAT PT-F
  •  very low hardness (silicone gel)
  •  inherent tack
  •  excellent mechanical damping properties
  •  rapid UV curing at room temperature in combination with long potlife (with ELASTOSIL® CAT UV)
  •  encapsulation of electronic components for the automotive and power electronics industries
  • production of damping elements

Surface preparation All surfaces must be clean and free of contaminants that will inhibit the cure of WACKER SilGel® 613. Examples of inhibiting contaminants are sulfur containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds – especially organotin compounds. If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.

WACKER SilGel® 613 and ELASTOSIL® CAT PT (-F, -UV) should be thoroughly mixed at a 10 : 1 ratio by weight or volume.

Curing:
Curing time of addition-curing silicone rubber is highly dependent on temperature, size and heat sink properties of the component being potted. Curing speed of the combination WACKER SilGel® 613 and ELASTOSIL® CAT UV (10:1) is highly dependent on UV-activation (UV/intensity and dose).
 

Lagerung

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemicals (South Asia)Pte.Ltd.
111A Pasteur, Ben Nghe Ward
700000 Ho Chi Minh City
Vietnam
+84  28  352025772588 (Phone)
+84 8 3825-6721  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Would you like a product sample?

You can request a product sample here.

Request sample

Mehr Produkte

Bitte wählen Sie eine Anwendung um Ihnen passende Produkte anzeigen zu können.

Bestellen

Meine Medien


Vertriebskontakt

Wacker Chemicals (South Asia)Pte.Ltd.
111A Pasteur, Ben Nghe Ward
700000 Ho Chi Minh City
+84  28  352025772588 (Phone)

Meine Favoriten

Meine Produkte