此内容适用于Pakistan。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

WACKER® FINISH WR 215 LV

WACKER® FINISH WR 215 LV is a reactive modified aminofunctional polydimethylsiloxane for use in non-yellowing and moisture neutral textile finishing.


特性

WACKER® FINISH WR 215 LV is particularly suitable as active substance in softener formulations for the impregnation of fibers and textiles. WACKER® FINISH WR 215 LV imparts a soft, drapable, and elastic touch to woven and knitted fabrics. WACKER® FINISH WR 215 LV imparts excellent slickness and resilience to the fibre. Furthermore textiles treated with WACKER® FINISH WR 215 LV improve moisture management. Additionally wash-and-wear properties and the crease recovery angle, sewability and tear strength are increased and abrasion loss is reduced. The effects are fast to washing and dry cleaning.

WACKER® FINISH WR 215 LV does not contain SVHC relevant impurities of more than 0.1% each, e.g. cyclics D4, D5 or D6.
 

WACKER® FINISH WR 215 LV is suitable for the formulation of micro emulsions and macro emulsions. WACKER® FINISH WR 215 LV can be utilized as the active substance in softener emulsions or in combination with other components, e.g. paraffin waxes, organic softeners, etc. Compatibility of the components has to be checked in each individual case. When applied under normal conditions as part of a softener formulation, WACKER® FINISH WR 215 LV has no effect on the whiteness. In fact, it has no perceptible influence on the color or color fastness of textiles and fibers in general.

Processing: 

WACKER® FINISH WR 215 LV can be applied neat, from solution, or emulsion. Suitable solvents are aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters, higher alcohols, and ketones. Most textile processes are water based. Hence WACKER® FINISH WR 215 LV is mainly applied from emulsion. Emulsions prepared of WACKER® FINISH WR 215 LV are diluted to the optimum concentration for the specific fabric. Application can be done either by padding or exhaustion method.

Typical formulation
7.0 parts i-tridecyl-O-(EO)5-H (HLB 11)
5.0 parts i-tridecyl-O-(EO)8-H (HLB 13)
3.0 parts polyethylene glycol 400 (PEG 400)
12.0 parts demineralized water
20.0 parts WACKER® FINISH WR 215 LV
52.78 parts demineralized water
0.12 % acetic acid 80%
0.1 parts preservative

For emulsion manufacturing slow shear mixers are sufficient (e.g. blade, anchor, propeller, etc.).
Add the emulsifiers to the demineralized water and thoroughly homogenize. Slowly add WACKER® FINISH WR 215 LV and stir until the product is homogeneous. Finally dilute with demin. water, add the acetic acid and the preservative. The first milky emulsion then clarifies. Filter the emulsion through a fine Perlon fabric.

储存

The "Best use before end" date of each batch is shown on the product label. Emulsions showing signs of creaming should be agitated before use to assure uniform consistency. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
 

销售和支持

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
阿拉伯联合酋长国
+971  4  709-9999 （电话）
+971 4 709-9911  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

经销商

未找到销售本产品的经销商

Mehr Produkte

Produkte Technische Daten
kinematische Viskosität Aminzahl 动态粘度 Aussehen 外观
ADVALON® CF 3295 - - - - < 200 mPa·s[1] < 200 mPa·s[1] - - white milky liquid[6] white milky liquid[6]
JETSOFT® CONCENTRATE - - approx. 0.65 ml 1 N HCI/g[8] approx. 0.65 ml 1 N HCI/g[8] approx. 3000 mPa·s[2] approx. 3000 mPa·s[2] - - yellowish turbid fluid yellowish turbid fluid
SIPELL® RE 61 F - - - - approx. 180 mPa·s[3] approx. 180 mPa·s[3] - - clear, slighty yellowish liquid clear, slighty yellowish liquid
SIPELL® RE 63 F approx. 300 mm²/s[9] approx. 300 mm²/s[9] - - - - clear to slightly turbid, brownish fluid clear to slightly turbid, brownish fluid - -
WACKER® FINISH CT 208 E - - - - - - milky-white liquid milky-white liquid - -
WACKER® FINISH CT 210 E - - - - - - milky-white liquid milky-white liquid - -
WACKER® FINISH CT 34 E - - - - - - clear, opaque clear, opaque - -
WACKER® FINISH CT 78 E - - - - - - milky, white milky, white - -
WACKER® FINISH CT 95 E - - - - - - clear, opaque clear, opaque - -
WACKER® FINISH CT 96 E - - - - - - clear, opaque clear, opaque - -
WACKER® FINISH eco WR 1100 LV - - approx. 0.15 ml 1 N HCI/g approx. 0.15 ml 1 N HCI/g approx. 4000 mPa·s[3] approx. 4000 mPa·s[3] clear to slightly turbid fluid clear to slightly turbid fluid - -
WACKER® FINISH WR 1100 LV - - approx. 0.15 ml 1 N HCI/g approx. 0.15 ml 1 N HCI/g approx. 4000 mPa·s[3] approx. 4000 mPa·s[3] clear to slightly turbid fluid clear to slightly turbid fluid - -
WACKER® FINISH WR 1200 - - approx. 0.24 ml 1 N HCI/g approx. 0.24 ml 1 N HCI/g approx. 7000 mPa·s[3] approx. 7000 mPa·s[3] clear to slightly turbid fluid clear to slightly turbid fluid - -
WACKER® FINISH WR 1300 - - approx. 0.3 ml 1 N HCI/g approx. 0.3 ml 1 N HCI/g approx. 1000 mPa·s[3] approx. 1000 mPa·s[3] clear to slightly turbid fluid clear to slightly turbid fluid - -
WACKER® FINISH WR 1300 LV - - approx. 0.3 ml 1 N HCI/g approx. 0.3 ml 1 N HCI/g approx. 1000 mPa·s[3] approx. 1000 mPa·s[3] clear to slightly turbid fluid clear to slightly turbid fluid - -
WACKER® FINISH WR 215 LV - - 0.12 - 0.20 meq/g 0.12 - 0.20 meq/g 1000 - 10000 mPa·s[3] 1000 - 10000 mPa·s[3] - - - -
WACKER® FINISH WR 301 - - approx. 0.27 ml 1 N HCI/g approx. 0.27 ml 1 N HCI/g approx. 1000 mPa·s[3] approx. 1000 mPa·s[3] clear to slightly turbid fluid clear to slightly turbid fluid - -
WACKER® FINISH WT 1650 LV - - approx. 0.6 ml 1 N HCI/g approx. 0.6 ml 1 N HCI/g approx. 1000 mPa·s[4] approx. 1000 mPa·s[4] clear to slightly turbid fluid[7] clear to slightly turbid fluid[7] - -
WACKER® IM 11 approx. 55 mm²/s[9] approx. 55 mm²/s[9] - - - - - - - -
WACKER® IM 15 approx. 120 mm²/s[9] approx. 120 mm²/s[9] - - - - - - - -
WACKER® IM 22 approx. 200 mm²/s[9] approx. 200 mm²/s[9] - - - - - - - -
WACKER® IM 35 60 - 100 mm²/s[10] 60 - 100 mm²/s[10] - - - - Clear, brownish liquid Clear, brownish liquid - -
WETSOFT® CTA - - approx. 0.2 ml 1 N HCI/g approx. 0.2 ml 1 N HCI/g 2000 - 5000 mPa·s[5] 2000 - 5000 mPa·s[5] clear to slightly turbid yellowish fluid clear to slightly turbid yellowish fluid - -
WETSOFT® eco LV 810 - - approx. 0.25 ml 1 N HCI/g approx. 0.25 ml 1 N HCI/g 1000 - 6000 mPa·s[3] 1000 - 6000 mPa·s[3] clear to slightly turbid yellowish liquid clear to slightly turbid yellowish liquid - -
WETSOFT® LV 750 - - - - - - milky-white to slightly yellowish[7] milky-white to slightly yellowish[7] - -
WETSOFT® LV 810 - - approx. 0.25 ml 1 N HCI/g approx. 0.25 ml 1 N HCI/g 1000 - 6000 mPa·s[3] 1000 - 6000 mPa·s[3] clear to slightly turbid yellowish liquid clear to slightly turbid yellowish liquid - -
WETSOFT® NE 810 - - approx. 0.25 ml 1 N HCI/g approx. 0.25 ml 1 N HCI/g 2000 - 7000 mPa·s[3] 2000 - 7000 mPa·s[3] clear to slightly turbid yellowish liquid clear to slightly turbid yellowish liquid - -
Legend
[1] Viscosity | WSTM 3001,  [2] 动态粘度 | 25 °C | acc. ISO 2555,  [3] 动态粘度 | 25 °C | DIN 53019,  [4] 动态粘度 | DIN 53019,  [5] 动态粘度 | Brookfield | acc. ISO 2555,  [6] 外观 | 25 °C | WSTM 3043,  [7] Appearance,  [8] Amine number substance,  [9] kinematische Viskosität | 25 °C | DIN 51562-1 ,  [10] kinematische Viskosität | DIN 51562-1  

购物车

我的媒体


转至订单表

联系方式

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
+971  4  709-9999 (Phone)

收藏夹

我的产品