此内容适用于英国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
ELASTOSIL® M 4115 A/B
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: Moldmaking
Properties
- low viscosity
- easy to meter due to 1 : 1 ratio
- low hardness (17 Shore A)
- good mechanical properties
- very fast and non-shrink cure at room temperature
- easy demolding
Specific features of ELASTOSIL® M 4115 A/B
- Addition Curing
- Fast curing at room temperature
- Flowable
- Low viscosity
- No chemical shrinkage
- Two-component
As a low-Shore addition-curing RTV-2 silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® M 4115 A/B is extremly suitable for casting all common reproduction materials, particularly if absolutely accurate copies of models with pronounced undercuts are required.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”.
Important note:
The platinum catalyst is in component A.
Caution:
A and B components may only be used together if they have the same batch number.
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
SM1 4AF Sutton, Surrey
United Kingdom
44 208 7707295 (Fax)
Website
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.