此内容适用于芬兰。系统检测到您来自美国。您希望将 美国设置为您的新国家吗?

ELASTOSIL® M 4440


Properties

  •  very good flowability and self-deaeration
  •  medium Shore A hardness (approx. 37)
  •  very good resistance to common casting resins

Specific features of ELASTOSIL® M 4440

  • Condensation-curing
  • Flowable
  • Resistance against polyester
  • Resistance against PU
  • Two-component

ELASTOSIL® M 4440 is a general-purpose mold-making material suitable for casting resins, wax, gyp-sum, etc.


ELASTOSIL® M 4440 is preferred when no or only minor undercuts are involved and a certain inherent stability of the mold is required.

ELASTOSIL® M 4440 is cured by adding Catalyst T 37 for long pot lives and curing times, and Catalyst T 40 for short pot lives and curing times.


The pot life is the period of time at 23 °C / 50 % rel. humidity during which the catalyzed mix to attain a viscosity of 100,000 mPa s and still be just pourable

Comprehensive instructions are given in our leaflet “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - Material and Processing Guidelines"

Detailed information on other mold-making compounds in the ELASTOSIL ® M range is contained in our brochure “ELASTOSIL® Silicone Rubber for Mold Making”.

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

ABIC KEMI AB
Fjaerilgatan
541602 Norrkoeping
Sweden
46  11  149030 (Phone)
Contact
Website

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

您是否需要产品样本?

您可以在此处索取产品样本。

索取样本

Order

My media


Sales Contact

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
+55  11  4789-8300 (电话)

My favorites

My products