SILFOAM^® SC 133

SILFOAM^® SC 133 is based on high-molecular polysiloxanes and has a mean viscosity of 30.000 mPa*s at 25°C. Even in small amounts it is highly effective in suppressing foam in detergents and systems with high surfactant content. SILFOAM^® SC 133 can be used for the production of antifoam powders for post-addition to powder detergents as foam suppressor.

SILFOAM^® SC 133 is an excellent defoamer for structured liquid detergents and it is a good deaerating agent and defoaming agent for gel products. SILFOAM^® SC 133 can be also used for slurry deaeration.

 

Processing

SILFOAM^® SC 133 can be processed to powder antifoams by various techniques: spray drying, spray mixing or adsorption. The resultant powders with an active content of 5-15% can be added to the final powder detergent in amounts of 0.5-2%.

SILFOAM^® SC 133 can be used in small amounts for slurry deaerating in spraying processes, where the slurry should be free of air in the crutcher, storage tank and in the slurry pipes to the spray tower. SILFOAM^® SC 133 should be metered into the crutcher (traditional soap mixer).

SILFOAM^® SC 133 can be used as defoamer in structured liquid detergents and gel products if dispersibility and compatibility are adequate. This can be tested in preliminary dispersibility and compatibility tests.

If SILFOAM^® SC 133 is not found to be sufficiently dispersible or compatible, we can recommend highly active derivatives with greater hydrophilicity such as SILFOAM^® SE 36 and SILFOAM^® SE 39 or the self-dispersing, anhydrous derivative SILFOAM^® SD 168.


Recommend dosages:

• Powder detergent: ca. 0.1 - 0.5%
• Slurry deaeration: ca. 0.05%