此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

SILFOAM® SC 201

SILFOAM® SC 201 is a 100% active, low viscosity, silicone defoamer compound based on Wacker's innovative polysiloxane and silica technology. It is highly efficient to control foam longer than most conventional defoamers in high alkaline and high temperature applications.

 

SILFOAM® SC 201  can be used directly to control foam in oil or solvent based foaming systems. It can also be easily emulsified into an emulsion for defoaming in aqueous based foaming systems.

 

SILFOAM® SC 201  is certified as Kosher. It is suitable for use in indirect food contact and secondary direct food additive applications listed under FDA 21 CFR176.170; 176.180; 176.200; 176.210;175.300; 177.2600; 178.3400; and 173.340. Some of the listed applications have regulatory limitations, please contact your Wacker Sales Representative for further information.

 

SILFOAM® SC 201  is also registered by NSF to Category Code 3D (as a fruit and vegetable washing product) and Q5 (for use as a foam control agent in egg washing machines). Please refer to the NSF sections for further guidelines on these applications.

SILFOAM® SC 201  can be used in various Food, Industrial, and Consumer applications. Some of the applications have regulatory limitations, please contact your Wacker Sales Representative for further information. 

 

SILFOAM® SC 201 is most efficient if introduced into the system before foaming has begun. 

 

SILFOAM® SC 201 may be introduced as is, or by dispersing in one or more of the ingredients of the system in which foam is to be controlled. It also can be pre-dispersed in an appropriate solvent and then add this dispersion to the foaming system. The solvent used for dilution could be:

 

  • Aromatic hydrocarbons – toluene
  • Aliphatic hydrocarbons – mineral spirits, t-butanol
  • Esters

 

Note: If solvents are used to aid dispersing the SILFOAM® SC 201, the FDA and contact sanctioning becomes null and void.

 

Prior to use, it is recommended that SILFOAM® SC 201 be stirred under low shear for a few minutes before using. This will ensure that the fillers are completely dispersed in the material.

储存

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国大陆
+86  21  6130-2000 （电话）
+86 21 6130-2500  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

更多产品

个产品 技术数据
dynamische Viskosität 动态粘度
PULPSIL® 160 C 约 20000 mPa·s[1] 约 20000 mPa·s[1] - -
PULPSIL® 20 C 约 2500 mPa·s[2] 约 2500 mPa·s[2] - -
PULPSIL® 278 C 约 50000 mPa·s[2] 约 50000 mPa·s[2] - -
SILFOAM® SC 201 - - 约 1500 cP[3] 约 1500 cP[3]
说明
[1] Viskosität, dynamisch | 25 °C | DIN EN ISO 3219,  [2] dynamische Viskosität | 25 °C | DIN EN ISO 3219,  [3] 动态粘度 | 25 °C | WSTM 3342 

购物车

我的媒体


转至订单表

联系方式

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
+86  21  6130-2000 （电话）

收藏夹

我的产品