此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
SILFOAM® eco SE 2060
SILFOAM® eco SE 2060, which contains 15 % active ingredient and 25 % solids, is a versatile antifoam that is comparatively rich in emulsifier and that can be easily metered due to its low viscosity, based on renewable raw materials according to TÜV NORD Standard REDcert².
Since it also possesses resistance to alkalis and acids, it may further be used in a wide range of applications in which pH is critical.
特性
SILFOAM® eco SE 2060 complies with US FIFRA regulations 40 CFR § 180.920 and can be applied for pre-harvest pesticide formulations. National regulations applicable in the countries concerned must be observed.
Specific features
• Emulsions
• Listed in EPA database
数据表
Processing
In general we recommend to stir the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 – 400 rpm).
But be cautious: too high shear can break the emulsion.
The typical dosage is in the range of 0.05 to 0.5 % and is best determined by preliminary tests.
Application
SILFOAM® eco SE 2060 shows a very good foam control performance in formulations rich in surfactants.
储存
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）
经销商
未找到销售本产品的经销商