ELASTOSIL® P 7684/60 A/B
Addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness.
特性
- low viscosity, easily pourable
- mixing ratio 1 : 1
- fast cure at room temperature which can be accelerated considerably by the application of heat
- low hardness Shore A (~ 12)
- translucent vulcanizate
ELASTOSIL® P 7684/60 A/B的特殊性能
- 加成固化
- 双组分
- 室温下快速固化
- 易流动的
- 适用于皮肤接触
ELASTOSIL® P 7684/60 A/B can be used for molding applications in prosthetics.
Components A and B of ELASTOSIL® P 7684/60 A/B are homogeneously mixed in a ratio of 1 : 1 and vulcanize rapidly at temperatures above 100 °C. In a given application the required curing conditions (temperature and time) will also depend on the size and thickness of the specimen.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”
Important note:
The platinum catalyst is in component A.
Caution!
Only A and B components with the same batch number may be processed together!
储存
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）