ELASTOSIL® R 401/10 OH
Peroxide cured vulcanizates made from this compound exhibit a unique combination of characteristics. They are noted for their good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.
ELASTOSIL® R 401/10 OH is a low duro silicone rubber base for extrusion and molding applications as well as for manufacturing of silicone sponge articles in combination with peroxide crosslinkers.
特性
This product can be used within a temperature range of - 55 °C to + 210 °C. The addition of heat stabilizers at service temperatures of more than 180 °C is recommended. Further information to improve the heat stability by use of specific ELASTOSIL® AUX Heat Stabilizers can be obtained from the Technical Information Sheet "ELASTOSIL® AUX Stabilizers H" or from the latest brochures.
ELASTOSIL® R 401/10 OH的特殊性能
- 通用型
- 食品接触
ELASTOSIL® R 401/10 OH is suitable for all applications where low hardness, high elongation, good damping etc. are required in combination with typical silicone properties such as very good heat resistance, good release, soft grip etc.
Postcured parts can be used for food contact applications and are suitable for use under the Recommendation "XV. Silicones" of the BfR and FDA § 177.2600 under observance of any given limitations on extractable and volatile substances.
The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous incorporation is a must to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition. Please consider the technical data sheets of the corresponding curing agent.
ELASTOSIL® R 401/10 OH can be used in combination with known peroxides. Dosage of 0.5 % of crosslinker E for extrusion and 0.6 % of C1 (dicumylperoxide) for molding purposes will lead to lowest durometer values. Higher dosage of the above mentioned peroxides will lead to harder vulcanizates.
For detailed information refer to our latest brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
包装
This product is available in 20 kg and 540 kg cardboard packaging.
Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.
储存
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）