此内容适用于孟加拉国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
VINNAPAS® 4240 N
VINNAPAS® 4240 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, wall applications and tile adhesives. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility. VINNAPAS® 4240 N is part of our standard range, offering you the best-in-class solutions.
Eigenschaften
- VINNAPAS® 4240 N is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
- Because of its relatively high ethylene content this resin is soft and flexible.
- Its glass transition temperature (Tg) is below the freezing point of water.
- Compounds modified with VINNAPAS® 4240 N exhibit improved adhesion, flexural strength, deformability, abrasion resistance, cohesion and are easier to process. Leveling, thixotropy and water retention are essentially unaffected. The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
- VINNAPAS® 4240 N contains a fine mineral filler as an antiblocking agent. It is produced without the addition of organic solvents, plasticizers and film-forming agents.
- VINNAPAS® 4240 N has essentially no effect on rheological properties and is a dispersible polymer powder in the lower Tg range. It is a general-purpose powder for end products with low emissions.
- It is suitable for formulating compounds with very good adhesion to inorganic and organic substrates, yet showing good flexibility.
Datenblätter
For typical application fields of VINNAPAS® 4240 N, refer to the section "application". Please discuss additional applications with your WACKER customer representative.
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4240 N with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
如果产品不是用于我们推荐的应用, 则购买者应对该产品的选择、加工和使用负全部责任. 此外还应遵守所有的相关法律法规.
可再分散乳胶粉的颜色可能会有略微的变化, 但不会对产品的功能造成影响.
Verpackung / Gebinde
Big Bags or bulk on request.
Lagerung
Vertrieb & Support
200233 Shanghai
中国大陆
+86 21 6130-2500 (Fax)
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.