此内容适用于巴西。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
WACKER® E 3196
WACKER® E 3196 is a nonionic oil-in-water emulsion of a polysiloxane containing alkyl and aralkyl organic groups.
WACKER® E 3196 was developed for the formulation of release agents for the thermal moulding of low-melting non-ferrous metals. The active ingredient of WACKER® E 3196 is an organo modified silicone fluid whose special chemical structure imbues it with the benefits of silicone fluids and mineral oils.
WACKER® E 3196 is especially recommended for the formulation of release agents which are applied at very high temperatures of the die. An outstanding release effect is even obtained when extremely small amounts of WACKER® E 3196 are used.
The specific non-ionic emulsifier system in WACKER® E 3196 facilitates the combination with emulsions of other release agent actives. In addition, WACKER® E 3196 may be easily diluted with water at any time. Though being diluted, it exhibits good storage stability.
However, preliminary trials on compatibility and stability must be performed.
Before use, WACKER® E 3196 must be stirred thoroughly.
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
We recommend storing WACKER® E 3196 at temperatures between +5 and +35 °C.
Sales and support
06612-060 Jandira
Brazil
+55 11 4789-8345 (Fax)
Website
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.