此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

很抱歉，本产品在中国大陆无货。请使用产品搜索或联系 我们。

WACKER® WS - WEATHERSEAL SUPERIOR

$WACKER<sup>®</sup> WS - WEATHERSEAL SUPERIOR

WACKER® WS - WEATHERSEAL SUPERIOR is a one-part neutral silicone sealant that will not stain exterior substrates. It exhibits good adhesion without primer on most building materials and displays outstanding weather resistance and durability.


特性

WACKER® WS - WEATHERSEAL SUPERIOR cures at room temperature in the presence of atmospheric moisture to give a permanent flexible silicone rubber.

  • long shelf life
  • non-sag
  • readily gunnable both at low (+5 °C) and high (+40 °C) temperatures
  • good tooling properties
  • good weatherability
  • good adhesion
  • excellent durability

The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material such as dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and clean, lint-free, cotton cloth. Remove residual solvent before it evaporates with a fresh clean, dry cloth. For application from cartridges cut thread open, fix nozzle on top and cut to required bead size. The sealant can be applied in beads or layers. It requires moisture in order to cure. The curing time can take longer at lower temperatures, lower humidity or by low volume of air exchange.


Restrictions on use WACKER® WS - WEATHERSEAL SUPERIOR is not recommended for sealing of aquarium or for long term use under water. WACKER® 121 - AQUARIUM has been specifically developed for aquarium applications. WACKER® WS - WEATHERSEAL SUPERIOR is not suitable for food grade applications where the joints are likely to come in contact with food. For this application please use WACKER® 120 – FOOD CONTACT. WACKER® WS - WEATHERSEAL SUPERIOR is not suitable for the following plastic substrates such as Polyethylene, Polypropylene, ABS, PMMA (Plexiglas®), Polycarbonate (PC).


It is the responsibility of the user to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coatings or organic plasticizers can lead to discoloration of the sealant. Cleaning agents and gaseous emissions can damage the sealant in its function or change its appearance. WACKER cannot make a general statement to the compatibility of all these varying materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests.


- Developed for sealing external and internal connection and expansion joints where a non-staining material is desirable

- Equally suitable for stone and ceramic joints as well as aluminum curtain wall and panel joints


Adhesion WACKER® WS - WEATHERSEAL SUPERIOR exhibits excellent primerless adhesion to most non-porous siliceous materials (e.g. glass, tiles, ceramics, enamel, glazed tiles) metals (e.g. aluminum, steel, zinc or copper) or painted wood


Users must carry out own tests due to the great variety of substrates.


The adhesion can be improved in many cases by pretreatment of the substrate with a primer.

包装

WACKER® WS - WEATHERSEAL SUPERIOR is usually supplied in standard size cartridges that fit all standard caulking guns. Additionally it is available in convenient sausages.

储存

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons. Store dry and cool. 

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国大陆
+86  21  6130-2000 （电话）
+86 21 6130-2500  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

更多产品

个产品 技术数据
抗位移能力 皮肤 Density 密度 Modulus at 100 % elongation 伸长100%时的模量
WACKER® 128 - - - - - - 1.02 g/cm³ 8.512 lb/gal 0.50 N/mm² 0.50 N/mm² - -
WACKER® 130 - GLASS AND GLAZING (German Technology) 25 %[13] 25 %[13] - - - - 1.00 g/cm³[1] 8.345 lb/gal[1] 0.38 N/mm²[6] 0.38 N/mm²[6] - -
WACKER® 131 - HMA GENERAL GLAZING - - - - - - 1.01 g/cm³[1] 8.429 lb/gal[1] 0.53 N/mm²[7] 0.53 N/mm²[7] - -
WACKER® 138 - - - - - - 1.01 g/cm³[1] 8.429 lb/gal[1] 0.5 N/mm²[7] 0.5 N/mm²[7] - -
WACKER® 400 - WINDOW GLAZING PERIMETER 25.0 %[13] 25.0 %[13] - - - - 1.03 g/cm³[1] 8.596 lb/gal[1] - - 0.37 N/mm²[8] 0.37 N/mm²[8]
WACKER® 500 - WINDOW GLAZING PERIMETER 25 %[13] 25 %[13] - - - - 1.01 g/cm³[1] 8.429 lb/gal[1] - - 0.37 N/mm²[9] 0.37 N/mm²[9]
WACKER® AF - ANTI FUNGI SILICONE SEALANT - - - - - - 1.03 g/cm³[2] 8.596 lb/gal[2] - - 0.34 N/mm²[10] 0.34 N/mm²[10]
WACKER® AS - ACETOXY SEALANT - - - - - - 0.97 g/cm³[1] 8.095 lb/gal[1] - - 0.36 N/mm²[9] 0.36 N/mm²[9]
WACKER® CA 25 %[13] 25 %[13] - - - - 1.01 g/cm³[2] 8.429 lb/gal[2] - - 0.34 N/mm²[10] 0.34 N/mm²[10]
WACKER® CS - CONSTRUCTION SEAL CN - - - - - - 1.41 g/cm³[1] 11.767 lb/gal[1] - - 0.48 N/mm²[11] 0.48 N/mm²[11]
WACKER® CS - CONSTRUCTION SEAL CN Tran - - - - - - 1.00 g/cm³[1] 8.345 lb/gal[1] - - 0.30 N/mm²[11] 0.30 N/mm²[11]
WACKER® DA - DURABLE ANTI FUNGI SILICONE - - - - - - 1.02 g/cm³[1] 8.512 lb/gal[1] - - - -
WACKER® DA Plus - - - - - - 1.02 g/cm³[2] 8.512 lb/gal[2] - - - -
WACKER® E900 CN - - - - - - 1.43 g/cm³[2] 11.934 lb/gal[2] - - 0.65 - 0.8 N/mm²[11] 0.65 - 0.8 N/mm²[11]
WACKER® FA 25 %[13] 25 %[13] - - - - 1.02 g/cm³[2] 8.512 lb/gal[2] - - 0.35 N/mm²[11] 0.35 N/mm²[11]
WACKER® FC CN - - - - - - 1.01 g/cm³[2] 8.429 lb/gal[2] - - 0.34 N/mm²[10] 0.34 N/mm²[10]
WACKER® GA (2) 20 %[13] 20 %[13] - - - - 1.01 g/cm³[1] 8.429 lb/gal[1] - - - -
WACKER® GA - GENERAL ALKOXY - - - - - - 1.43 g/cm³ 11.934 lb/gal - - 0.68 N/mm²[11] 0.68 N/mm²[11]
WACKER® GB - - - - - - 0.97 g/cm³[2] 8.095 lb/gal[2] - - 0.30 N/mm²[10] 0.30 N/mm²[10]
WACKER® GM - GLAZING AND METAL (German Technology) 20 %[13] 20 %[13] - - - - 1.00 g/cm³[2] 8.345 lb/gal[2] - - 0.32 N/mm²[11] 0.32 N/mm²[11]
WACKER® GP - GENERAL PURPOSE (ZJG) 12.5 %[13] 12.5 %[13] 20 min[14] 20 min[14] - - 0.98 g/cm³[3] 8.178 lb/gal[3] - - 0.36 N/mm²[9] 0.36 N/mm²[9]
WACKER® GS 25 %[13] 25 %[13] - - - - 1.01 g/cm³[1] 8.429 lb/gal[1] - - - -
WACKER® HF - - - - - - 1.41 g/cm³[1] 11.767 lb/gal[1] - - 0.75 N/mm²[10] 0.75 N/mm²[10]
WACKER® KB - KITCHEN AND BATH - - - - - - 1.03 g/cm³[1] 8.596 lb/gal[1] - - 0.34 N/mm²[10] 0.34 N/mm²[10]
WACKER® MATT6 20 %[13] 20 %[13] - - - - 0.95 g/cm³[1] 7.928 lb/gal[1] - - 0.54 N/mm²[9] 0.54 N/mm²[9]
WACKER® MN - - - - - - 0.97 g/cm³[2] 8.095 lb/gal[2] - - 0.3 N/mm²[10] 0.3 N/mm²[10]
WACKER® MN - MULTIPURPOSE NEUTRAL Colored - - - - 0.97 g/cm³[4] 8.095 lb/gal[4] - - - - 0.2 N/mm²[12] 0.2 N/mm²[12]
WACKER® MN - MULTIPURPOSE NEUTRAL Transparent - - - - 0.97 g/cm³[4] 8.095 lb/gal[4] - - - - 0.3 N/mm²[10] 0.3 N/mm²[10]
WACKER® MP - - - - 1.01 g/cm³[5] 8.429 lb/gal[5] - - - - 0.37 N/mm²[9] 0.37 N/mm²[9]
WACKER® OS - OXIME SEALANT Light Colors (1) - - - - 0.97 g/cm³[5] 8.095 lb/gal[5] - - - - - -
WACKER® OS - OXIME SEALANT Semi Transparent - - - - 0.97 g/cm³[4] 8.095 lb/gal[4] - - - - 0.20 N/mm²[9] 0.20 N/mm²[9]
WACKER® OS - OXIME SEALANT Standard Colors (1) - - - - 1.45 g/cm³[4] 12.101 lb/gal[4] - - - - 0.48 N/mm²[11] 0.48 N/mm²[11]
WACKER® OS - OXIME SEALANT TRANS COLORS 25 %[13] 25 %[13] - - 1.02 g/cm³[4] 8.512 lb/gal[4] - - - - - -
WACKER® PA - PREMIUM ACETOXY - - - - - - - - - - 0.5 N/mm²[11] 0.5 N/mm²[11]
WACKER® S608 25 %[13] 25 %[13] - - 1.39 - 1.42 g/cm³[5] 11.6 - 11.85 lb/gal[5] - - - - - -
WACKER® SA - - - - 1.01 g/cm³[5] 8.429 lb/gal[5] - - - - 0.34 N/mm²[9] 0.34 N/mm²[9]
WACKER® SN - SANITARY NEUTRAL (German Technology) - - - - 1.01 g/cm³[4] 8.429 lb/gal[4] - - - - 0.34 N/mm²[11] 0.34 N/mm²[11]
WACKER® W905 25 %[13] 25 %[13] - - 1.50 g/cm³[4] 12.518 lb/gal[4] - - - - 0.60 N/mm² 0.60 N/mm²
WACKER® W952 - - - - 1.43 g/cm³[5] 11.934 lb/gal[5] - - - - - -
WACKER® WD - WINDOWS AND DOORS Colored (1) - - - - 1.45 g/cm³[4] 12.101 lb/gal[4] - - - - 0.48 N/mm²[11] 0.48 N/mm²[11]
WACKER® WD - WINDOWS AND DOORS Colored (4) 25 %[13] 25 %[13] - - 1.39 g/cm³[4] 11.6 lb/gal[4] - - - - - -
WACKER® WD - WINDOWS AND DOORS Colored (6) 25 %[13] 25 %[13] - - - - - - - - 0.27 N/mm²[9] 0.27 N/mm²[9]
WACKER® WD - WINDOWS AND DOORS Transparent (1) - - - - 0.97 g/cm³[4] 8.095 lb/gal[4] - - - - - -
WACKER® WD - WINDOWS AND DOORS Transparent (3) - - - - - - - - - - 0.20 N/mm²[9] 0.20 N/mm²[9]
WACKER® WD - WINDOWS AND DOORS Transparent (4) 25 %[13] 25 %[13] - - 1.02 g/cm³[4] 8.512 lb/gal[4] - - - - - -
WACKER® WS35 35 %[13] 35 %[13] - - 1.39 g/cm³[5] 11.6 lb/gal[5] - - - - - -
说明
[1] 密度 | ISO 1183-1 A,  [2] 密度 | DIN EN ISO 1183-1 A,  [3] 密度 | 23 °C | ISO 1183-1 A,  [4] Density | ISO 1183-1 A,  [5] Density | DIN EN ISO 1183-1 A,  [6] Modulus at 100 % elongation | ISO 8339,  [7] Modulus at 100 % elongation | ISO 8339-A,  [8] 伸长100%时的模量 接缝 | ISO 8339-A,  [9] 伸长100%时的模量 | ISO 8339,  [10] 伸长100%时的模量 | ISO 37,  [11] 伸长100%时的模量 | ISO 8339-A,  [12] 伸长100%时的模量 | 100.0 % | ISO 8339-A,  [13] 抗位移能力 | ISO 11600,  [14] Skin forming time | 23 °C | 50 % r.h  

购物车

我的媒体


转至订单表

联系方式

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
+86  21  6130-2000 （电话）

收藏夹

我的产品