VINNAPAS® 4449 E (Scale-up Product)
VINNAPAS® 4449 E (Scale-up Product) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® E and provides adhesion and flexibility, improved performance on workability, consistency and wetting capability. VINNAPAS® 4449 E (Scale-up Product) is in the process of introduction into industrial use (Scale-up Product). Therefore the product data given are subject to change. Always consult WACKER POLYMERS about the product’s availability before using it for industrial purposes.
特性
- VINNAPAS® 4449 E (Scale-up Product) is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
- Because of its relatively high ethylene content, this resin is soft and flexible. Its glass transition temperature (Tg) is below the freezing point of water.
- Dry-mix mortars modified with VINNAPAS® 4449 E (Scale-up Product) exhibit improved adhesion, flexural strength, deformability, and abrasion resistance.
- VINNAPAS® 4449 E improves fresh mortar workability and consistency. The mortar is softer, creamy and easier to process with improved troweling properties, while its thixotropy remains essentially unaffected.
- VINNAPAS® 4449 E (Scale-up Product) contains a fine mineral filler as an antiblocking agent. It is produced without the addition of organic solvents, plasticizers and film-forming agents.
- VINNAPAS® 4449 E (Scale-up Product) is a dispersible polymer powder in the lower Tg range. It is suitable for formulating highly flexible compounds with very good adhesion to organic substrates (polystyrene) and end products with low emissions. It can be used in applications where improved fresh mortar properties are key.
For typical application fields of VINNAPAS® 4449 E (Scale-up Product), refer to the section "application". Please discuss additional applications with your WACKER customer representative.
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4449 E (Scale-up Product) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
如果产品不是用于我们推荐的应用, 则购买者应对该产品的选择、加工和使用负全部责任. 此外还应遵守所有的相关法律法规.
可再分散乳胶粉的颜色可能会有略微的变化, 但不会对产品的功能造成影响.
包装
Big Bags or bulk on request.
储存
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）