此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

很抱歉，本产品在中国大陆无货。请使用产品搜索或联系 我们。

ETONIS® 7245 A

ETONIS® 7245 A is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of +23 °C. and is used in asphalt emulsion-based applications. ETONIS® 7245 A imparts excellent adhesion, abrasion resistance, tensile strength, film flexibility, and faster drying time.


特性

ETONIS® 7245 A can be compounded with asphalt emulsion and is combinable with common additives such as emulsifier, defoamer, thickeners and fillers. In asphalt emulsion, ETONIS® 7245 A is compatible with both cationic and anionic systems. ETONIS® 7245 A improves rheology, softening point, elastic recovery, torsional recovery and tensile strength in residual asphalt. It provides excellent adhesion, abrasion resistance, and fuel resistance in surface treatment applications.

ETONIS® 7245 A is suitable for modifying both anionic and cationic asphalt emulsions where rapid setting, good machining, and easy clean-up properties are required. It is used in waterproofing, roofing, tack coat, chip seal, fog seal, scrub seal, micro surfacing and sealers, and other cold asphalt applications.

If ETONIS® 7245 A is used in applications other than those mentioned, the choice, processing and use of ETONIS® 7245 A is the sole responsibility of the purchaser. All legal and other regulations must be complied with. Slight discoloration may occur without impairing the product's functionality.

ETONIS® 7245 A may be used with both anionic and cationic asphalt emulsions. ETONIS® 7245 A can be incorporated into asphalt emulsion through addition to the soap solution (batch process) or via co-milling (continuous process). It may also be added directly to the asphalt emulsion with minimal stirring. The amount of ETONIS® 7245 A needed to modify cold asphalt emulsions ranges from 1.0 - 5. % v/v relative to the asphalt emulsion. The amounts used in special applications for higher ductility, flexibility and elongation may be considerably higher. The exact amount will depend on the requirements profile.

包装

Totes and Bulk.

储存

可再分散乳胶粉产品在储存期间必须进行防潮处理. 产品在高于30°C的温度下较长时间存放时, 尤其在此期间受压、受潮或受到日光照射后, 可能会出现结块现象. 产品在开封后应妥善地密封好后存放. 建议在仓库中存放可再分散乳胶粉产品, 并将其放置在阴凉干燥处. 可再分散乳胶粉产品的储存期不要超过六个月(自交付之日起算), 除非产品检测报告中规定了不同的日期（该日期优先适用）. 如果可再分散乳胶粉产品被存放的时间超过了建议的期限, 该产品可能仍然可以使用, 但是在这种情况下, 我们建议客户在使用该产品前对产品的性能是否满足预期用途的要求进行检测.

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国大陆
+86  21  6130-2000 （电话）
+86 21 6130-2500  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

经销商

未找到销售本产品的经销商

更多产品

个产品 技术数据
固体含量 动力粘度 玻璃化温度
ETONIS® 1400 S 46 - 48 % 46 - 48 % 200 - 800 mPa·s 200 - 800 mPa·s - -
ETONIS® 1450 S - - 10 - 15 mPa·s 10 - 15 mPa·s - -
ETONIS® 5150 P - - 100 - 400 mPa·s 100 - 400 mPa·s - -
ETONIS® 5210 P 54 - 56 % 54 - 56 % 2700 - 3700 mPa·s 2700 - 3700 mPa·s 约 7 °C[1] 约 44.6 °F[1]
ETONIS® 7142 A - - - - 约 -15.0 °C[2] 约 5.00 °F[2]
ETONIS® 7145 A - - - - 约 0.0 °C[2] 约 32 °F[2]
说明
[1] 玻璃化温度 | 专用方法,  [2] 玻璃化温度 | DSC, specific method 

购物车

我的媒体


转至订单表

联系方式

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
+86  21  6130-2000 （电话）

收藏夹

我的产品