此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
SEMICOSIL® 831 A/B
SEMICOSIL® 831 is a 2-part(1:1) transparent silicone bonding material that cured by heat
特性
- Applicable to various proceprocesses. molding, dispensing, etc.)
- High viscosity for less flowability
- Excellent transparency
- Low shrinkage
- Wide cure temperature range
- No Oxygen inhibition
SEMICOSIL® 831 A/B 的特殊性能
- 加成固化
- 双组分
- 无化学收缩
- 高温下快速固化
- 高透明度
- Sealingng or Dam material for optical bonding
- Prevent spreading out of bonding material
- Maintain thickness of bonding material
- Encapsulation of optical & electronic components
Surface preparation
All surfaces must be clean and free of contaminants that will inhibit the cure of SEMICOSIL® 831.
Examples of inhibiting contaminants are sulfur-containing materials, plasticizers, urethanes, amine-containing materials, and organometallic compounds – especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small-scale test should be run to determine compatibility.
Mixing ratio
Part A (SEMICOSIL® 831 A) : Part B (SEMICOSIL® 831 B) = 1 : 1
Curing
Curing speed can be adjusted by temperature and time.
We recommend running preliminary tests to optimize conditions for a particular application. Comprehensive processing instructions are given in below.
- 30 min at 70°C
- 10 min at 150°C
Cure time can be increased or decreased depending on the applied temperature.
包装
1KG BOTTLE PE
18KG HOBBOCK PE
储存
SEMICOSIL® 831 A/B should be stored between 5 °C and 30 °C and below 60%RH in the tightly closed original container.
The 'Best use before end' date (Shelf life) of each batch appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Shelf life;
- SEMICOSIL® 831 A : 1 year
- SEMICOSIL® 831 B : 1 year
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）