此内容适用于德国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
ELASTOSIL® AUX BATCH PT 1
ELASTOSIL® AUX BATCH PT 1 is a catalyst paste for blending into the respective ELASTOSIL® R plus base compounds used for extrusion.
特性
ELASTOSIL® AUX BATCH PT 1 is suitable for the extrusion grades ELASTOSIL® R plus 43xx (e.g. 4305) and blended into the respective base on a clean and cooled open roller mill with low friction in a ratio of 1/100 to 2/100. The standard dosage is 1.5 parts calculated on 100 parts of base. Good homogenization is essential for a later good result in curing!
The pot life of the readily catalyzed mixtures is up to 24 hours depending on storage conditions. For extrusion material it is generally recommended to store the mixture for 1 hour after blending to support the transfer from physical to chemical dispersion of the catalyst.
CAUTION! Platinum catalysts are generally inhibited by heavy metals, sulphur, amines and other subsubstances causing desactivation of the catalyst! For this reason exposition or contact with these substances thus have to be strictly excluded during transport, storage and processing!
储存
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）