ELASTOSIL® AUX MOULD RELEASE AGENT A
ELASTOSIL® AUX MOULD RELEASE AGENT Ainternal mould release additive for solid silicone rubber injection / compression moulding
特性
- easy application as additive during compounding
ELASTOSIL® AUX MOULD RELEASE AGENT A的特殊性能
- 助剂
- 食品接触
ELASTOSIL® AUX MOULD RELEASE AGENT A is used as an internal additive for solid silcone rubbers to improve the demoulding properties during injection / compression moulding for technical applications.
ELASTOSIL® AUX MOULD RELEASE AGENT A is added on an open roll mill to the compound.
The recommended dosage is 0.3 - 1%.
The applicable amount has to be thoroughly tested prior to use since the addition of ELASTOSIL® AUX MOULD RELEASE AGENT A has an adverse effect on compression set and may also affect other physical properties.
For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
包装
This product is available in 100 ml can and 20 kg cardboard packaging.
储存
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）