PULPSIL® 683 E
PULPSIL® 683 E is a heavily concentrated, highly effective and easy dilutable silicone antifoam emulsion especially for the use in pulp mills.
Properties
- very good long-term efficiency
- very good knock-down efficiency
- excellent drainability
- free of organic emulsifiers
Data sheets
In general we recommend stirring the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 – 400 rpm). But be cautious: too high shear can break the emulsion.
PULPSIL® 683 E can be easily diluted with water to any desired concentration.
PULPSIL® 683 E is stable and highly effective, also at low concentrations, (additional stabilizer may be needed).
It is particularly recommended to use PULPSIL® 683 E for pulp washing (Kemi washer process) due to its excellent drainage properties.
The risk of "deposits" is particularly low when using PULPSIL® 683 E due to its very fine particle size distribution and stable emulsifier system, which increases the quality of the pulp produced.
During dilution other additives can be added to boost the formulation, if needed.
Lagerung
Store in a dry place between 15°C and 25°C and protect against direct sunlight.
Minimum short-time temperature allowed during storage and transportation: 0°C
Maximum short-time temperature allowed during storage and transportation: 40°C
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Distributoren
Es wurden leider keine Distributoren für dieses Produkt gefunden