此内容适用于德国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

SILRES® BS 1042

$SILRES<sup>®</sup> BS 1042

SILRES® BS 1042 is an aqueous emulsion of a reactive polydimethylsiloxane. It is used to impart water-repellency to glass wool mat or rock wool mat bound with phenolic resin or to low-density bulk goods such as perlite or vermiculite.

 

To impart water repellency to glass wool or rock wool, SILRES® BS 1042 can be mixed with the phenolic resin solution or other additives. As the stability of the obtained mixtures greatly depends on the composition of the phenolic resin or the additives, no general comments can be made on compatibility.
With suitable equipment, SILRES® BS 1042 can either be applied at the same time as or shortly before application of the binder.
Treatment of glass wool mat or rock wool mat with SILRES® BS 1042 after drying and hardening is not recommended.

 

SILRES® BS 1042 is applied by spraying. For this purpose it can be diluted with any quantity of water.
The usual amount of SILRES® BS 1042 applied ranges between 0.2 and 2 % based on the weight of material to be treated.
The quantity of SILRES® BS 1042 to be applied depends on the desired water repellency of the end product; a general recommendation cannot be given. Individual tests must always be conducted in order to define the necessary quantity. Excess SILRES® BS 1042 will cause a significant deterioration of the water repellent effect in perlite or similar materials.
To impart water repellency to perlite or similarly porous materials, SILRES® BS 1042 is applied by spraying as well. It can be sprayed onto the warm material in order to avoid an additional drying process. Prolonged heating of the siliconized material must however be avoided.

 

Guide formulation for laboratory tests to make perlite water-repellent:
Mix 0.80 g SILRES® BS 1042 with 400 g of deionized water. Thoroughly mix or spray 200 g of perlite with this impregnating solution in a mixer until the liquid has been completely absorbed. Fill the moist material into a large dish and dry in a drying oven at 50 °C for seven days.
Fill the impregnated perlite into fine-meshed nylon sacks and immerse in deionized water. The sacks must be covered by
5 cm of water.
Weigh the samples at fixed intervals. The results show that the perlite absorbs about 5 % of its dry weight in water after one day. Untreated perlite absorbs far more than 100 % of its dry weight in water in the same period. The test for water repellency according to ASTM 303-77 is recommended.

储存

SILRES® BS 1042 must be stored in the tightly closed original container. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

 

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国大陆
+86  21  6130-2000 （电话）
+86 21 6130-2500  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

更多产品

个产品 技术数据
pH值 成分 外观
SILRES® BS 1042 - - 约 60.0 wt. %[1] 约 60.0 wt. %[1] white, milky liquid white, milky liquid
SILRES® BS 1052 - - 约 65 wt. %[1] 约 65 wt. %[1] white, milky liquid white, milky liquid
SILRES® BS 5133 - - 约 60 wt. %[2] 约 60 wt. %[2] white liquid[4] white liquid[4]
SILRES® BS 5137 - - 约 50 wt. %[2] 约 50 wt. %[2] white, milky liquid white, milky liquid
SILRES® BS 5138 - - 约 50 wt. %[3] 约 50 wt. %[3] white, milky liquid white, milky liquid
SILRES® BS 5140 约 5 - 8[5] 约 5 - 8[5] 约 50 wt. %[3] 约 50 wt. %[3] white, milky liquid white, milky liquid
说明
[1] 固含量,  [2] 活性物质,  [3] Solid content,  [4] 外观 | visual check,  [5] pH 

购物车

我的媒体


转至订单表

联系方式

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
+49  711  61942-0 （电话）

收藏夹

我的产品